OPERATION
AUTOMATIC OPERATION
The unit is set to default to Automatic operation when it is first turned on. The air cleaner will automatically sense the amount of impurities in the air, and adjust the fan speed accordingly.
MANUAL OPERATION
After you turn on the unit, you can switch to manual operation by using the FAN CONTROL button on the remote control or the FAN SPEED button on the unit.
* 5000B does not come with a remote control.
•1, 2, 3, 4 AND TURBO
Select your desired speed. The TURBO level, the highest fan speed, can be activated manually for maximum air circulation.
*In case of 5000B, there are
four speed levels: 1,2,3, and TURBO.
•PLASMA ON/OFF (5000 AND 5000S) Activate PlasmaWaveTM by pressing PLASMA button on the unit and remote. (5000 and 5000S)
* In case of 5000B, PlasmaWaveTM feature is always on for maximum result.
•TIMER (5000 AND 5000S)
Set the timer for 2 or 4 hours by pressing the TIMER button on the remote or the unit. The unit will stop operating when the set time is up. Cancel the timer by pressing the TIMER button until the 2- and
•SLEEP MODE
Use the TIMER button on the display or remote to manually turn the light sensor on or off. With the light sensor on, the unit will automatically operate in Sleep mode when the room is dark. When the
PART IS
BLINKING
room is light, the unit will revert to its previous settings. Sleep mode provides the lowest, quietest fan setting and a dimmed display panel.
DUST AND ODOR SENSORS
*5000B is odor sensor only.
The dust and odor sensors show elevated levels of air
•Odor Sensor
The odor sensor responds to cigarette smoke and pet odors, as well as other air contaminants such as insecticides, cosmetics, alcohol, or aerosol sprays.
LOW
MEDIUM
HIGH Indoor Odor Volume
•Dust Sensor
The dust sensor detects particles in the air such as cigarette smoke, dust, and pollen.
LOW 
MEDIUM 
HIGH 
Indoor Dust Volume
8