Winix Air Cleaner manual Care and Maintenance, Filter Cassette Replacement, Replacement Procedure

Page 12

CARE AND MAINTENANCE

CLEANING

• Clean unit as necessary by wiping with a dry, soft

cloth; for stubborn stains, use a warm, damp cloth.

• Do not use volatile fluids

such as benzene, paint thinner, or scouring powder, as they may damage the unit surface. Keep the unit dry.

Clean the wall behind the air outlet periodically, as it may become dirty.

Filter Cassette Replacement

The REPLACE FILTER INDICATOR will signal when to replace the filter cassette. The replacement period will vary depending on the hours of use, air quality, and location of the unit. However, most filters in normal use need to be replaced annually.

5000 and 5000S:

-For your convenience, all three filters (Washable Anti-Bacterial Pre-Filter, True HEPA Filter, Washable Nano- Silver Mesh/Activated Carbon Filter) come in one pre-packaged replacement cassette.

-Change filter cassette when REPLACE FILTER indicator is on.

-Push reset on inside of unit after changing filter.

-For optimum unit efficiency, wash the Washable Anti-Bacterial Pre-Filter and Washable Nano-Silver Mesh/ Carbon Filter as described below (Filter Cleaning) every three months.

-Do not wash and reuse the True HEPA Filter—it will not work effectively.

5000B

-In case of 5000B, there are two separate filters: HEPA filter and Carbon Pre-filter.

-Change only HEPA filter when REPLACE FILTER indicator is on.

-Push reset on inside of unit after changing filter.

-For best performance, change the Carbon Pre-Filter every three months.

- Do not wash and reuse Carbon Pre- Filter — it will not work effectively.

NOTE: For replacement filters, contact your dealer or visit www.winixinc.com

WARNING: Before replacing or cleaning any filters, make sure to remove the power plug from the wall outlet.

Replacement Procedure

1. Remove the front panel by grasping the bottom outside edges and pulling gently toward you.

2. Pull out the filter cassette by grasping the tabs located on each side.

3. Remove the plastic wrap from the new filter cassette.

4. Place the new filter cassette in the main unit.

5.Replace the front panel after pressing REPLACE FILTER reset button.

6.Plug in the power cord to a wall outlet and turn on the unit.

Filter Cleaning (5000 and 5000S)

In case of 5000 and 5000S, we recommend cleaning the Washable Anti-Bacterial Pre-Filter and the Washable Nano-Silver

11

Image 12
Contents Page Page Table of Contents WarrantyPackage Contents Safety InstructionsProduct Specifications Important Instructions for Using Your AIR CleanerAIR Cleaner Features MULTI-STAGE CleaningAIR Cleaner SET-UP Washable Carbon Filter 5000 & 5000SPlasmaWave All FAN Speed Indicator Shows current fan speed setting Display Panel 5000 and 5000SDisplay Panel 5000B Sleep Mode OperationAutomatic Operation Manual OperationRemote Control Using the Remote ControlFAN Control Care and Maintenance Filter Cassette ReplacementReplacement Procedure Filter Cleaning 5000 and 5000SDust Sensor Cleaning 5000 and 5000S Troubleshooting Solutions to Common ProblemsProblem Possible Solution Page Índice GarantíaContenido DEL Paquete Instrucciones DE SeguridadEspecificaciones DEL Producto No manipular el enchufe con las manos mojadasCaracterísticas DEL Purificador DE Aire Montaje DEL Purificador DE Aire Pantalla 5000 y 5000S Pantalla 5000B Cambiar EL MedidorEL Indicador DE Velocidad Modo Automático OOperación Operación AutomáticaOperación Manual Detectores DE Polvo Y OloresAparato DE Control Remoto Botón Power Botón Turbo Botón AUTO/SLEEP Botón Timer Botones Cuidado Y Mantenimiento LimpiezaReemplazo del marco del filtro Procedimiento del recambioLimpieza del detector de polvo 5000 y 5000S Marco DEL FiltroResolución DE Problemas Solución de problemas comunesProblema Posible Solución Servicio AL Cliente Asegúrese de mencionar el número del modelo