Model W1823 (Mfg. Since 9/10)
Additional Safety for Dust Collectors
SAFETY
@EK<E;<;LJ<% This dust collector is only intended for collecting wood dust and chips from woodworking machines. DO NOT use this dust collector to collect metal, dirt, pebbles, drywall, asbestos, lead paint, silica, liquids, aerosols, or any flammable, combustible, or hazardous materials.
FG<I8K@E>CF:8K@FE% To reduce respiratory exposure to fine dust, locate permanently installed dust collectors away from the working area, or in another room that is equipped with a smoke detector. DO NOT operate the dust collector in rainy or wet
;@J:FEE<:K@E>GFN<IJLGGCP% Turn the switch F==, disconnect the dust collector from the power supply, and allow the impeller to completely stop before leaving the machine unattended or doing any service, cleaning, maintenance, or adjustments.
@DG<CC<I?8Q8I;J% DO NOT place your hands or tools near the open inlet during operation for any reason. The powerful suction could easily cause accidental contact with the impeller, which will cause serious personal injury or damage to the machine. Always keep small animals and children away from open dust collection inlets.
?8Q8I;FLJ;LJKÇN<8II<JG@I8KFI% Fine dust that is too small to be caught in the filter will be blown into the ambient air during operation. Always wear a NIOSH- approved respirator during operation and for a short time after to reduce your risk of permanent respiratory damage.
;LJK8CC<I>@<J% Dust from certain woods may cause an allergic reaction in people and animals. Make sure you know what type of wood dust you will be exposed to in case there is a possibility of an allergic reaction.
<DGKP@E>;LJK% When emptying dust from the collection container, wear a respirator and safety glasses. Empty dust away from ignition sources and into an approved container.
=@I<JLGGI<JJ@FE% Only operate the dust collector in locations that contain a fire suppression system or have a fire extinguisher nearby.
JLJG<E;<;;LJKG8IK@:C<J8E;@>E@K@FE JFLI:<J% DO NOT operate the dust collector in areas where explosion risks are high. Areas of high risk include, but are not limited to, areas near pilot lights, open flames, or other ignition sources.
8MF@;@E>JG8IBJ% DO NOT allow steel or rocks to strike the
JK8K@:<C<:KI@:@KP% High amounts of static electricity are generated when plastic ducting is used for dust collection lines. Although rare, sparks caused by static electricity can cause explosions or fire. To reduce this risk, thoroughly ground all plastic ducting used in the dust collection system.
I<>LC8I:C<8E@E>% Regularly check/empty the collection bags or drum to avoid buildup of fine dust that can increase the risk of fire. Make sure to regularly clean the surrounding area where the machine is operated— excessive dust buildup on overhead lights, heaters, electrical panels, or other heat sources will increase the risk of fire.