Yeoman YMMB manual Fitting and Removal of Baffle, Fitting and Removal of the Grate

Page 25

MAINTENANCE and SERVICING

2.REMOVAL OF THE LOG GUARD

2.1To remove the log guard:

—Lift log guard clear of the supporting brackets.

—Rotate to clear the sides of the door opening.

Do not use appliance without the log guard in position.

3.FITTING AND REMOVAL OF BAFFLE

3.1See Installation Instructions, Section 4.

3.2It is important to remove and clean the baffle system to ensure the flue ways are clear of soot and debris and to ensure the safe, efficient operation of the stove. The frequency of cleaning depends on the stove operating conditions.

3.3The baffle system is designed to give safe and efficient operation of the stove. Replace any damaged baffle immediately.

3.4Do not modify the baffle system.

4.FITTING AND REMOVAL OF THE GRATE

4.1See Installation Instructions, Section 5.

5.FITTING AND REMOVAL OF CAST IRON FIREBRICKS

5.1See Installation Instructions, Section 7.

6.FITTING A NEW DOOR GLASS

6.1To maintain safe use of the appliance damaged door glass must be replaced immediately. To do this the door must first be removed:

—Using a 5mm A/F Hey Key remove the door by opening, removing the 4 bolts and lifting the door free of the appliance body.

4 Bolts

PR7084

—Lay the door flat on a soft flat surface to protect the paintwork and glass.

—Remove the glass clamp and screws x 8. The old glass can then be lifted clear of the door. Note how the sealing rope is placed around the glass.

Dispose of the old glass safely.

Fixing Screws x 8

Glass rope

seal

B

Door

PR8738

Seal

Length (mm)

Glass rope seal A

1000

Glass rope seal B

100

—Clean, and re-paint, the rear of the door if required.

—Clean the screws with light oil.

—Coat with high temperature anti-seize grease to aid future removal.

—Carefully wrap glass sealing rope (A) round the sides and bottom edge of the glass.

Glass rope seal

A

PR8757

—Fix glass sealing rope (B) to the matt black side of the top face as shown.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Models Ymmb Yeoman CL Milner BrickInstallation Technical Specification Ymmb Appliance Commissioning Checklist User InstructionsPRE-INSTALLATION Installation InstructionsInstallation Engineer Appliance Commissioning ChecklistRetailer appliance was purchased from Essential Information Must be completedUser Instructions For Air Controls see DiagramGeneral Points Triple Air SystemsIf necessary seek expert advice Using the Appliance for the First TimeUse a protected gloved hand to operate Do not touch the paint during the first period of useLighting The appliance Recommended FuelsWood Logs Do not close the Secondary Air control when burning wood Air Wash AdjustRunning The appliance Burning Solid fuelBurning tips Extended burning ASH RemovalOVER-FIRING Chimney fireCleaning Glass General CleaningChimney Sweeping Care of stoveSeasonal use Troubleshooting tipsSmoke Control kit Standard features TECHNICAL SPECIFICATIONCL Milner Brick Packing listSite Requirements CL Inset Dimensions103 369 243 282 104 379 156 281 593 520 Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue or ChimneyFlue Plate AdditionalFor advice before proceeding Minimum dimensions HearthFlue Outlet Positions Hearth and appliance. Consult a structural engineerFire surround clearances Milner Brick OpeningOpening 555-560mmFlue PRE-INSTALLATION ChecksVentilation ModelFitting Appliances on a boat Installing the Appliance Installation InstructionsLegal requirements Ø16mm rope Slide stove into positionRemoval of the LOG Guard Removal of the doorRemoval of the baffle Do not use appliance without the log guard in positionRemoval of the Grate Lift and rotate the centre grate see Diagram Centre grateDo not modify the baffle system Co alarms Removal of Cleanburn ChamberBS EN 50292 and from the alarm manufacturers instructions Removal of Cast Iron FIREbricksCommissioning CommissioningRecord serial number in Appliance Commissioning Annual Service Fitting and Removal of the Grate Fitting and Removal of BaffleFitting and Removal of Cast Iron Firebricks Fitting a NEW Door GlassBlack face Glass rope Seal Fitting a new door sealDo not over tighten the clamp as this could break the glass JointTo adjust the door hinge plate assembly Adjusting Door Catch & HingesDo not undo the catch more than 3-4mm Hetas Approved Chimney SweepsSpare Parts Outer Door 10TH Service Service RecordsPage Division of Stovax

YMMB specifications

Yeoman YMMB, short for Yeoman Yet Another Model Builder, is an advanced tool in the realm of web development, particularly known for its capabilities in scaffolding projects and automating repetitive tasks. It serves as a robust generator framework, streamlined to enhance developer productivity by allowing them to focus on coding rather than setting up boilerplate code. Yeoman YMMB is designed for building modern web applications and provides a seamless workflow that integrates various technologies and development practices.

One of the main features of Yeoman YMMB is its powerful scaffolding ability. Developers can easily create a new project structure with just a few commands, generating the essential files and directories needed to kickstart a web application. This feature not only saves time but also ensures that developers adhere to best practices and standards in web development. The intelligent generators available with Yeoman YMMB can create everything from single-page applications to entire web ecosystems.

Yeoman YMMB leverages several modern web technologies that have become industry standards. For instance, it supports popular front-end frameworks like React, Angular, and Vue.js, making it a versatile choice for developers working on diverse projects. Additionally, it comes with built-in support for various CSS preprocessors such as Sass and Less, enhancing the styling process and allowing for more maintainable stylesheets.

Another characteristic of Yeoman YMMB is its emphasis on modularity. The generator ecosystem enables developers to create and share custom generators that can be tailored to specific project requirements. This feature fosters a collaborative environment, as developers can build upon each other’s work, thereby speeding up the development process.

In terms of configuration, Yeoman YMMB offers a flexible setup, allowing developers to integrate with task runners like Gulp and Grunt. This integration enables automation of tasks such as minification, linting, and testing, streamlining the development workflow. With these automation tools, developers can focus more on writing code and less on managing the build process.

Moreover, Yeoman YMMB is community-driven, meaning it benefits from continuous updates and improvements based on user contributions. The active community provides extensive documentation and a plethora of plugins, each designed to enhance functionality and features. Through this collaboration, Yeoman YMMB remains relevant and up-to-date with the latest trends in web development.

In summary, Yeoman YMMB is an essential tool for web developers who seek efficiency and modernization in their workflow. Its scaffolding capabilities, support for modern technologies, modularity, and community-driven enhancements make it a valuable asset in building contemporary web applications.
Top Page Image Contents