Yeoman YMMB User Instructions, General Points, Triple Air Systems, For Air Controls see Diagram

Page 4

USER INSTRUCTIONS

1.General POINTS

1.1Before installation and/or use of this appliance please read these instructions carefully to ensure that all requirements are fully understood.

The appliance must be fitted by a registered installer*, or approved by your local building control officer.

1.2All local regulations, including those referring to national and European Standards need to be complied with when installing the appliance.

1.3Only use for domestic heating in accordance with these operating instructions.

1.4Only approved fuels must be burned. Do not use with liquid fuels or as an incinerator.

1.5Appliance surfaces become very hot when in use. Use a suitable fireguard if young children, elderly or infirm persons are present. Yeoman offer firescreens, sparkguards and hearthgate systems for protection‡. Your Yeoman retailer can advise you about these products.

1.6Do not place photographs, TV’s, paintings, porcelain or other combustible items on the wall or near the appliance. Exposure to hot temperatures will cause damage. Do not place furniture, or other items such as drying clothing, closer than 1m from the front of this appliance.

1.7Extractor fans or cooker hoods must not be placed in the same room or space as this can cause the appliance to emit fumes into the room.

1.8Do not obstruct inside or outside ventilation required for the safe use of this appliance.

1.9Do not make unauthorised changes to the appliance.

1.10The chimney must be swept at least once a year (see User Instructions, Section 13).

1.11Do not connect, or share, the same flue or chimney system with another appliance.

SERIAL NUMBER

1.12This number is required when ordering spare parts or making warranty claims.

It is found on the appliance data plate (see Diagram 1).

1

Data Plate

PR9024

AIR CONTROLS

Triple Air Systems

Several Yeoman appliances have triple air systems providing cleaner burning, and greater efficiency and control (see Diagram 2).

1)Airwash - air drawn over the window cleans the glass. The source of Primary Combustion air when burning wood.

2)Primary Air - for use with solid fuel and to start wood fires.

3)Cleanburn - secondary air is preheated through a heat exchanger to combust unburned hydrocarbons, providing a cleaner and more efficient burn.

2

Airwash

Secondary

Primary

PR9146

For Air Controls see Diagram 3.

In the U.K. these products must conform to the latest edition of BS 8423, Fireguards for use with solid fuel appliances.

If appliance is operating unattended they must conform to the latest edition of BS 3248

*Registered on the Competent Persons Scheme (GB only) see page 26.

4

Image 4
Contents Yeoman CL Milner Brick Models YmmbYmmb Appliance Commissioning Checklist User Instructions Installation Technical SpecificationPRE-INSTALLATION Installation InstructionsAppliance Commissioning Checklist Installation EngineerRetailer appliance was purchased from Essential Information Must be completedFor Air Controls see Diagram User InstructionsGeneral Points Triple Air SystemsUsing the Appliance for the First Time If necessary seek expert adviceUse a protected gloved hand to operate Do not touch the paint during the first period of useLighting The appliance Recommended FuelsWood Logs Air Wash Adjust Do not close the Secondary Air control when burning woodRunning The appliance Burning Solid fuelBurning tips ASH Removal Extended burningOVER-FIRING Chimney fireGeneral Cleaning Cleaning GlassChimney Sweeping Care of stoveSeasonal use Troubleshooting tipsSmoke Control kit TECHNICAL SPECIFICATION Standard featuresCL Milner Brick Packing listSite Requirements CL Inset Dimensions103 369 243 282 104 379 156 281 593 520 Flue or Chimney Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.KFlue Plate AdditionalMinimum dimensions Hearth For advice before proceedingFlue Outlet Positions Hearth and appliance. Consult a structural engineerMilner Brick Opening Fire surround clearancesOpening 555-560mmPRE-INSTALLATION Checks FlueVentilation ModelFitting Appliances on a boat Installation Instructions Installing the ApplianceLegal requirements Ø16mm rope Slide stove into positionRemoval of the door Removal of the LOG GuardRemoval of the baffle Do not use appliance without the log guard in positionRemoval of the Grate Lift and rotate the centre grate see Diagram Centre grateDo not modify the baffle system Removal of Cleanburn Chamber Co alarmsBS EN 50292 and from the alarm manufacturers instructions Removal of Cast Iron FIREbricksCommissioning CommissioningRecord serial number in Appliance Commissioning Annual Service Fitting and Removal of Baffle Fitting and Removal of the GrateFitting and Removal of Cast Iron Firebricks Fitting a NEW Door GlassFitting a new door seal Black face Glass rope SealDo not over tighten the clamp as this could break the glass JointAdjusting Door Catch & Hinges To adjust the door hinge plate assemblyDo not undo the catch more than 3-4mm Hetas Approved Chimney SweepsSpare Parts Outer Door Service Records 10TH ServicePage Division of Stovax

YMMB specifications

Yeoman YMMB, short for Yeoman Yet Another Model Builder, is an advanced tool in the realm of web development, particularly known for its capabilities in scaffolding projects and automating repetitive tasks. It serves as a robust generator framework, streamlined to enhance developer productivity by allowing them to focus on coding rather than setting up boilerplate code. Yeoman YMMB is designed for building modern web applications and provides a seamless workflow that integrates various technologies and development practices.

One of the main features of Yeoman YMMB is its powerful scaffolding ability. Developers can easily create a new project structure with just a few commands, generating the essential files and directories needed to kickstart a web application. This feature not only saves time but also ensures that developers adhere to best practices and standards in web development. The intelligent generators available with Yeoman YMMB can create everything from single-page applications to entire web ecosystems.

Yeoman YMMB leverages several modern web technologies that have become industry standards. For instance, it supports popular front-end frameworks like React, Angular, and Vue.js, making it a versatile choice for developers working on diverse projects. Additionally, it comes with built-in support for various CSS preprocessors such as Sass and Less, enhancing the styling process and allowing for more maintainable stylesheets.

Another characteristic of Yeoman YMMB is its emphasis on modularity. The generator ecosystem enables developers to create and share custom generators that can be tailored to specific project requirements. This feature fosters a collaborative environment, as developers can build upon each other’s work, thereby speeding up the development process.

In terms of configuration, Yeoman YMMB offers a flexible setup, allowing developers to integrate with task runners like Gulp and Grunt. This integration enables automation of tasks such as minification, linting, and testing, streamlining the development workflow. With these automation tools, developers can focus more on writing code and less on managing the build process.

Moreover, Yeoman YMMB is community-driven, meaning it benefits from continuous updates and improvements based on user contributions. The active community provides extensive documentation and a plethora of plugins, each designed to enhance functionality and features. Through this collaboration, Yeoman YMMB remains relevant and up-to-date with the latest trends in web development.

In summary, Yeoman YMMB is an essential tool for web developers who seek efficiency and modernization in their workflow. Its scaffolding capabilities, support for modern technologies, modularity, and community-driven enhancements make it a valuable asset in building contemporary web applications.