Yeoman YMMB manual Using the Appliance for the First Time, Use a protected gloved hand to operate

Page 5

USER INSTRUCTIONS

AIRWASH AND PRIMARY AIR CONTROLS

3

Airwash Control

Open Close

Primary Air Control

Open Close

PR9025

SECONDARY AIR CONTROLS

4

Secondary Air Control

In - Closed

Out - Open

PR9026

DOOR HANDLE

1.13Use a protected gloved hand to operate.

1.14Rotate clockwise and pull to open.

Warning: Do not force the handle as damage may occur (see Diagram 5).

DO NOT OPEN THE DOOR WITH BARE HANDS

5

Turn handle clockwise to open

PR9027

WARNING

Properly installed, operated and maintained, this appliance will not emit fumes into the room. Occasional fumes from de-ashing and refuelling may occur.

Persistent fume emission is potentially dangerous and must not be tolerated.

If fume emission does persist:

—Open doors and windows to ventilate the room.

—Leave the room.

—Allow fire to burn out and safely dispose of fuel from the appliance.

—Check for chimney blockage and clean if required.

—Do not attempt to relight until the cause of the emission has been identified and corrected

If necessary seek expert advice.

—All open flued appliances can be affected by temporary atmospheric conditions which may allow fumes to enter the house. Because of this an electronic carbon monoxide detector conforming to the latest edition

of BSEN50292 must be fitted in the same room as the appliance. The existence of an alarm must not be considered a substitute for ensuring regular servicing and maintenance of the appliance and chimney system.

If the alarm sounds follow the instructions given under Warning above.

2.USING THE Appliance FOR THE FIRST TIME

2.1To allow the appliance to settle, and fixing glues and paint to fully cure, operate the appliance at a low temperature for first few days.

2.2Do not touch the paint during the first period of use.

2.3During this time the appliance may give off some unpleasant odours. Keep the room well ventilated to avoid a build-up of fumes.

2.4Please be aware that, during use, rope seals may discolour. This is normal.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Models Ymmb Yeoman CL Milner BrickInstallation Technical Specification Ymmb Appliance Commissioning Checklist User InstructionsPRE-INSTALLATION Installation InstructionsInstallation Engineer Appliance Commissioning ChecklistRetailer appliance was purchased from Essential Information Must be completedUser Instructions For Air Controls see DiagramGeneral Points Triple Air SystemsIf necessary seek expert advice Using the Appliance for the First TimeUse a protected gloved hand to operate Do not touch the paint during the first period of useWood Logs Recommended FuelsLighting The appliance Do not close the Secondary Air control when burning wood Air Wash AdjustRunning The appliance Burning Solid fuelBurning tips Extended burning ASH RemovalOVER-FIRING Chimney fireCleaning Glass General CleaningChimney Sweeping Care of stoveSmoke Control kit Troubleshooting tipsSeasonal use Standard features TECHNICAL SPECIFICATIONCL Milner Brick Packing list103 369 243 282 104 379 156 281 593 520 CL Inset DimensionsSite Requirements Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue or ChimneyFlue Plate AdditionalFor advice before proceeding Minimum dimensions HearthFlue Outlet Positions Hearth and appliance. Consult a structural engineerFire surround clearances Milner Brick OpeningOpening 555-560mmFlue PRE-INSTALLATION ChecksVentilation ModelFitting Appliances on a boat Installing the Appliance Installation InstructionsLegal requirements Ø16mm rope Slide stove into positionRemoval of the LOG Guard Removal of the doorRemoval of the baffle Do not use appliance without the log guard in positionDo not modify the baffle system Lift and rotate the centre grate see Diagram Centre grateRemoval of the Grate Co alarms Removal of Cleanburn ChamberBS EN 50292 and from the alarm manufacturers instructions Removal of Cast Iron FIREbricksRecord serial number in Appliance Commissioning CommissioningCommissioning Annual Service Fitting and Removal of the Grate Fitting and Removal of BaffleFitting and Removal of Cast Iron Firebricks Fitting a NEW Door GlassBlack face Glass rope Seal Fitting a new door sealDo not over tighten the clamp as this could break the glass JointTo adjust the door hinge plate assembly Adjusting Door Catch & HingesDo not undo the catch more than 3-4mm Hetas Approved Chimney SweepsSpare Parts Outer Door 10TH Service Service RecordsPage Division of Stovax

YMMB specifications

Yeoman YMMB, short for Yeoman Yet Another Model Builder, is an advanced tool in the realm of web development, particularly known for its capabilities in scaffolding projects and automating repetitive tasks. It serves as a robust generator framework, streamlined to enhance developer productivity by allowing them to focus on coding rather than setting up boilerplate code. Yeoman YMMB is designed for building modern web applications and provides a seamless workflow that integrates various technologies and development practices.

One of the main features of Yeoman YMMB is its powerful scaffolding ability. Developers can easily create a new project structure with just a few commands, generating the essential files and directories needed to kickstart a web application. This feature not only saves time but also ensures that developers adhere to best practices and standards in web development. The intelligent generators available with Yeoman YMMB can create everything from single-page applications to entire web ecosystems.

Yeoman YMMB leverages several modern web technologies that have become industry standards. For instance, it supports popular front-end frameworks like React, Angular, and Vue.js, making it a versatile choice for developers working on diverse projects. Additionally, it comes with built-in support for various CSS preprocessors such as Sass and Less, enhancing the styling process and allowing for more maintainable stylesheets.

Another characteristic of Yeoman YMMB is its emphasis on modularity. The generator ecosystem enables developers to create and share custom generators that can be tailored to specific project requirements. This feature fosters a collaborative environment, as developers can build upon each other’s work, thereby speeding up the development process.

In terms of configuration, Yeoman YMMB offers a flexible setup, allowing developers to integrate with task runners like Gulp and Grunt. This integration enables automation of tasks such as minification, linting, and testing, streamlining the development workflow. With these automation tools, developers can focus more on writing code and less on managing the build process.

Moreover, Yeoman YMMB is community-driven, meaning it benefits from continuous updates and improvements based on user contributions. The active community provides extensive documentation and a plethora of plugins, each designed to enhance functionality and features. Through this collaboration, Yeoman YMMB remains relevant and up-to-date with the latest trends in web development.

In summary, Yeoman YMMB is an essential tool for web developers who seek efficiency and modernization in their workflow. Its scaffolding capabilities, support for modern technologies, modularity, and community-driven enhancements make it a valuable asset in building contemporary web applications.
Top Page Image Contents