Yeoman YMMB manual Adjusting Door Catch & Hinges, To adjust the door hinge plate assembly

Page 27

MAINTENANCE and SERVICING

8.ADJUSTING DOOR CATCH & HINGES

8.1To maintain the safe use of your appliance, you may need to adjust the door hinges to ensure the door closes safely and correctly.

8.2To adjust the door hinge plate assembly:

Open door and lift free of hinge plate.

Lay the door face down on a soft, flat surface, to protect the paintwork and glass.

Use an 5mm A/F hexagon key to loosen the 4 x M6 screws.

M6 cap

screws x 4

PR8741

The hinge plate assembly is slotted so it can be moved up, down and sideways by approximately 3mm to adjust the position of the door in relation to the appliance.

Once the desired position has been achieved ensure the screws are firmly tightened against the hinge plate assembly to maintain the position.

8.3To adjust the door catch:

Open the door to gain access to the catch.

Use a 13mm A/F spanner to loosen the half lock nut on the outside of the appliance body. This will allow the dome catch to rotate in and out (see diagram below).

DO NOT undo the catch more than 3-4mm.

Stove body

Washer

Half lock nut

Dome catch

PR9049

Once the desired setting has been achieved ensure the lock nuts are tightened against the appliance body.

Organisations authorised to certify competence in the installation of domestic solid fuel appliances (Competent Persons Scheme):

APHC - Association of Plumbing and Heating

Contractors (Certification) Ltd.

www.aphc.co.uk

BESCA - Building Engineering Services Competence Accreditation Ltd.

www.besca.org.uk

HETAS - Heating Equipment Testing and Approval Scheme Ltd.

www.hetas.co.uk

NAPIT - National Association of Professional Inspectors and Testers Ltd.

www.napit.org.uk

NICEIC - NICEIC Group Ltd.

www.niceic.org.uk

HETAS Approved Chimney Sweeps:

Nacs - The National Association of Chimney Sweeps www.chimneyworks.co.uk

APICS - The Association of Master Chimney Sweeps Ltd. www.apics.org

The Guild of Master Chimney Sweeps guildofmasterchimneysweeps.co.uk

27

Image 27
Contents Models Ymmb Yeoman CL Milner BrickInstallation Instructions Ymmb Appliance Commissioning Checklist User InstructionsInstallation Technical Specification PRE-INSTALLATIONEssential Information Must be completed Appliance Commissioning ChecklistInstallation Engineer Retailer appliance was purchased fromTriple Air Systems For Air Controls see DiagramUser Instructions General PointsDo not touch the paint during the first period of use Using the Appliance for the First TimeIf necessary seek expert advice Use a protected gloved hand to operateRecommended Fuels Lighting The applianceWood Logs Burning Solid fuel Air Wash AdjustDo not close the Secondary Air control when burning wood Running The applianceBurning tips Chimney fire ASH RemovalExtended burning OVER-FIRINGCare of stove General CleaningCleaning Glass Chimney SweepingTroubleshooting tips Seasonal useSmoke Control kit Packing list TECHNICAL SPECIFICATIONStandard features CL Milner BrickCL Inset Dimensions Site Requirements103 369 243 282 104 379 156 281 593 520 Additional Flue or ChimneyMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue PlateHearth and appliance. Consult a structural engineer Minimum dimensions HearthFor advice before proceeding Flue Outlet Positions555-560mm Milner Brick OpeningFire surround clearances OpeningModel PRE-INSTALLATION ChecksFlue VentilationFitting Appliances on a boat Ø16mm rope Slide stove into position Installation InstructionsInstalling the Appliance Legal requirementsDo not use appliance without the log guard in position Removal of the doorRemoval of the LOG Guard Removal of the baffleLift and rotate the centre grate see Diagram Centre grate Removal of the GrateDo not modify the baffle system Removal of Cast Iron FIREbricks Removal of Cleanburn ChamberCo alarms BS EN 50292 and from the alarm manufacturers instructionsCommissioning CommissioningRecord serial number in Appliance Commissioning Annual Service Fitting a NEW Door Glass Fitting and Removal of BaffleFitting and Removal of the Grate Fitting and Removal of Cast Iron FirebricksJoint Fitting a new door sealBlack face Glass rope Seal Do not over tighten the clamp as this could break the glassHetas Approved Chimney Sweeps Adjusting Door Catch & HingesTo adjust the door hinge plate assembly Do not undo the catch more than 3-4mmSpare Parts Outer Door 10TH Service Service RecordsPage Division of Stovax

YMMB specifications

Yeoman YMMB, short for Yeoman Yet Another Model Builder, is an advanced tool in the realm of web development, particularly known for its capabilities in scaffolding projects and automating repetitive tasks. It serves as a robust generator framework, streamlined to enhance developer productivity by allowing them to focus on coding rather than setting up boilerplate code. Yeoman YMMB is designed for building modern web applications and provides a seamless workflow that integrates various technologies and development practices.

One of the main features of Yeoman YMMB is its powerful scaffolding ability. Developers can easily create a new project structure with just a few commands, generating the essential files and directories needed to kickstart a web application. This feature not only saves time but also ensures that developers adhere to best practices and standards in web development. The intelligent generators available with Yeoman YMMB can create everything from single-page applications to entire web ecosystems.

Yeoman YMMB leverages several modern web technologies that have become industry standards. For instance, it supports popular front-end frameworks like React, Angular, and Vue.js, making it a versatile choice for developers working on diverse projects. Additionally, it comes with built-in support for various CSS preprocessors such as Sass and Less, enhancing the styling process and allowing for more maintainable stylesheets.

Another characteristic of Yeoman YMMB is its emphasis on modularity. The generator ecosystem enables developers to create and share custom generators that can be tailored to specific project requirements. This feature fosters a collaborative environment, as developers can build upon each other’s work, thereby speeding up the development process.

In terms of configuration, Yeoman YMMB offers a flexible setup, allowing developers to integrate with task runners like Gulp and Grunt. This integration enables automation of tasks such as minification, linting, and testing, streamlining the development workflow. With these automation tools, developers can focus more on writing code and less on managing the build process.

Moreover, Yeoman YMMB is community-driven, meaning it benefits from continuous updates and improvements based on user contributions. The active community provides extensive documentation and a plethora of plugins, each designed to enhance functionality and features. Through this collaboration, Yeoman YMMB remains relevant and up-to-date with the latest trends in web development.

In summary, Yeoman YMMB is an essential tool for web developers who seek efficiency and modernization in their workflow. Its scaffolding capabilities, support for modern technologies, modularity, and community-driven enhancements make it a valuable asset in building contemporary web applications.