Wayne-Dalton 6100 Thank you for your purchase, Wood Preparation and Painting

Page 35

�Painting Continued....

Wood (Preparation and Painting)

These instructions apply to all Wood Doors produced and sold by Wayne-Dalton Corp. The exterior surfaces, as well as all edges must be properly painted and maintained if satisfactory performance is to be achieved. The purpose for painting is to both protect and beautify the substrates. These requirements for finishing are intended to achieve both functions for reasonable service life of wood doors. Wood doors must be completely finished prior to installation, to ensure that the interior and exterior surfaces, as well as all edges of the doors are properly protected against moisture or other contaminants. Wood doors, in a non-finished condition, must not be transported or stored where the wood surfaces can be exposed to moisture or other contaminants.

Wood (Surface Preparation)

All surfaces must be clean, free of dust and dirt and any other contamination.

Wood (Painting)

Using painter’s tape, tape off all metal surfaces. A premium quality latex house based finish paint is recommended for use over the factory latex based primer

Painting the wood surfaces with at least 2 coats of finish paint over the primer. Follow paint manufacture’s label directions completely for all coatings. Once finished, remove painter’s tape and touch up where necessary.

Wood (Maintenance and Refinishing)

Yearly inspection of all the wood surfaces of the garage door(s) will reveal the extent of weathering and the need for refinishing. When the finish becomes eroded or thin, clean and prime the areas of deterioration. Follow up with a complete refinishing of the door(s), according to the above directions, as well as the manufacturer’s label directions. Protecting the door(s) from prolonged exposure to moisture and sunlight is vital in extending the service life of your garage door(s).

Covered by one or more of the following Patents; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740; 5,568,672; 5,718,533; 6,019,269; 6,089,304; 6,644,378; 6,374,567; 6,561,256; 6,527,037; 6,640,872; 6,672,362; 6,725,898; 6,843,300; 6,915,573; 6,951,237; 7,014,386; 7,036,548; 7,059,380; 7,121,317; 7,128,123; 7,134,471; 7,134,472; 7,219,392; 7,254,868. Canadian: 2,384,936; 2,477,445; 2,495,175; 2,507,590; 2,530,701; 2,530,74; 2, 2,532,824. Other US and Foreign Patents pending

Please Do Not Return This Product To The Store

Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Thank you for your purchase

35

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Maintenance

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Windload Table of Contents PRE-INSTALLATION Package ContentsDoor Section Identification Removing An Existing Door Tools RequiredMounting pad to structurally sound Preparing the OpeningFailure to securely Attach a suitableFlagangle InstallationAttaching Quick Install Flag Angles to Vertical TracksHorizontal Angles Attaching Fully AdjustableFlagangles to Vertical Track Installing The Jamb Brackets Attaching U-Bars Pull Handle Installation Lift Handle Installation Drums Roller SlidesVertical Track Bottom SectionTop Roller Slides Stacking SectionsBracket Installation Adjustable OperatorDoor Operation Important the DimensionTop Section , or Door could Attaching Quick Install FlaganglesTo Horizontal Tracks Studplate and 2 1/4-20 flange Hex nuts. If you have fully adjustableVertical track. If you have quick Horizontal track to the flagangle withCorrect Incorrect TorqueMaster Spring TubeGarage Looking OUT Center Bracket BushingDrum Wraps/ Cable Drums Hole in the top of the bracket End BracketsSecurely attached to both End BracketsSecuring Center Bracket AssemblyAssembly, follow these instructions Header using 2 5/16 x 1-5/8 lagWinding Springs Cable AdjustmentSecuring Door For Spring WindingWinding Springs Spring, rotate the winding shaft Can deviate from spring turn chartWheel for winding or place a mark on Winding shaft and end bracketSound Framing Member Rear SupportImportant do not Support Full Tension of the Spring Spring Turn ChartInstructions TorqueMaster Plus ResetSpring Systems only Resetting AN EngagedTorquemaster Plus Double Balancing Door Be Adjusted Equally on Double Spring DoorsPull Rope Side LockOperator Framing Members Perforated Angle Trolley OperatorOperator Rail Painting CleaningGlass Cleaning Instructions Acrylic Cleaning InstructionsWood Preparation and Painting Thank you for your purchaseMay not apply to you Lifetime Limited Warranty Model
Related manuals
Manual 20 pages 28.32 Kb Manual 24 pages 37.63 Kb

6100 specifications

The Wayne-Dalton 6100 is a premium garage door that stands out for its combination of durability, aesthetics, and advanced technology. Renowned for its quality, the 6100 model offers a perfect blend of style and functionality, making it a popular choice among homeowners and builders alike.

One of the key features of the Wayne-Dalton 6100 is its construction. The door is built with a robust steel frame and a thick fiberglass exterior. This design not only ensures long-lasting performance but also provides excellent insulation. The door’s insulation is particularly noteworthy, as it helps to regulate indoor temperatures, keeping garages warmer in the winter and cooler during the summer months. This feature is essential for homeowners who use their garages as workspaces or additional storage.

In terms of design, the 6100 model offers a customizable aesthetic. It comes in various colors and finishes, allowing homeowners to select an option that complements their home’s exterior. The smooth fiberglass surface can mimic the look of wood, giving the appearance of an upscale, wooden garage door without the associated maintenance. Additionally, the door is available in multiple panel designs, catering to specific architectural styles.

The 6100 is equipped with advanced technologies that enhance usability and security. For instance, it features a user-friendly operating system that allows for smooth and quiet opening and closing. This is particularly beneficial in residential areas where noise can be a concern. Moreover, the door can be integrated with garage door openers that come with smart technology, enabling users to control the door remotely through mobile apps.

Safety is another priority with the Wayne-Dalton 6100. The door incorporates safety features such as pinch-resistant panels and an automatic reverse mechanism, which ensures that the door will stop and reverse immediately if it detects an obstacle in its path. This is essential for preventing accidents and ensuring the safety of family members and pets.

In summary, the Wayne-Dalton 6100 model combines durability, insulation, customizable aesthetics, advanced technology, and essential safety features, making it a versatile choice for any garage. Its ability to harmonize practicality with elegance truly sets it apart in the competitive garage door market. Whether for functionality or style, the 6100 delivers on all fronts, making it a worthwhile investment for homeowners looking to enhance their property.
Top Page Image Contents