Kidde KN-COPD-3-UK manual Direct Plug Alarm, Wall Mounted Alarm

Page 10

2520-7203-00.qxd 2006.4.7 3:50 PM Page 8

Installation

Direct Plug Alarm

In its “as shipped” configuration, your Kidde CO Alarm is ready to be plugged directly into a wall-mains socket.

To install:

1.) Choose a standard unswitched 230V electrical outlet to plug the alarm into.

2.) Plug the alarm in.

Note: Do not cover the alarm with a curtain or other obstruction.

Wall Mounted Alarm

For a wall-mount, you will need to pull out the removable adapter and power cord. This simple process is described on the following pages.

Installation tips for power cord models:

The power cord option provides more flexibility in mounting locations and allows the alarm to be easily installed at eye level.

Note: If you mount the alarm high on a wall, make sure it is at least

15.2cm (6") from the ceiling. Any higher than this, it will be in “dead air space” and CO may not reach the sensors.

To remove the adapter and install:

1.With the bottom of the unit facing you (adapter at top), use a small screwdriver or similar tool to pry the back cover up to release it.

2.Remove the back cover.

3.Next, place your thumb on the adapter thumb release and pull the adapter thumb release out slightly. Pull the adapter out of the alarm with your other hand.

4.With the adapter removed, pull the power

cord out of the cord recess, remove the

Adapter Release

twist tie, and extend the power cord.

 

5.With the power cord extended, tuck the last few inches of the power cord into the cord recess (See the illustration on page 4). Gently pull the cord at the bottom of the cord recess until the cord becomes taught and lays flat in cord recess.

6.Using the back cover, mark the location for the two mounting holes on the wall.

7.If you are mounting the alarm in plaster board or drywall, drill a 4.8 mm (3/16") hole into the wall and insert the plastic anchors provided. Install the two screws provided into the wall or wall anchors until the screw head is approximately 3 mm (1/8") from the wall.

WALL

1/8"

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Carbon Monoxide Alarm Table of Contents Qxd 2006.4.7 350 PM Quick Set Up Guide Introduction Carbon MonoxideFeatures Where to Install Your CO Alarm What Carbon Monoxide Can and Cannot DoMounting Configuration InstallationWhere Not to Install Your CO Alarm How to Install Your CO Alarm Direct Plug Alarm Wall Mounted AlarmTable Top Alarm Normal Operating CharacteristicsHow to Test Your CO Alarm Low Battery WarningNormal Operation Malfunction Signal Group 1 Component Failure How to Know If Your Alarm is MalfunctioningIf the alarm malfunctions Malfunction Signal Group 2 Microprocessor FailureHow to Care for Your Alarm Effects of CO Exposure To Reset the Peak Level Memory…Peak Level Memory Button Your Family at Risk for CO PoisoningHome Safety Tips What You Can Do Where CO Comes FromWhat You Can do to Protect Your Family What You Should Know Before the Alarm Sounds Indicators of Possible CO LeaksHidden Causes of CO Emission What You Should Not DoEffects of Carbon Monoxide Exposure Effects of Carbon Monoxide ExposureWhat To Do When The Alarm Sounds What to Do When the Alarm Sounds for Carbon MonoxideHaemoglobin test. This test measures the amount of CO What To Do When The Alarm Sounds WAdjacent to the residence Immediately after CO exposure. Acute CO poisoning is usuCall a Qualified Technician to Find and Repair the Problem Sometimes it’s Difficult to Find the Source of CO in a HomeTest/Reset Button Product SpecificationsBattery Backup Technical InformationReplacement of the Alarm How the Unit Determines When to AlarmAccuracy of the Digital Display Display Readings AlarmSound Action Plug into AC asWarranty For Warranty Service Questions or for More Information

KN-COPD-3-UK specifications

The Kidde KN-COPD-3-UK is an advanced carbon monoxide detector that provides crucial protection against the dangers of CO gas, a silent and deadly threat often produced by faulty appliances or insufficient ventilation. Designed for residential use, the device integrates cutting-edge technologies and user-focused features to ensure the safety and peace of mind of families across the UK.

One of the standout features of the KN-COPD-3-UK is its electrochemical sensor, which is highly reliable and sensitive to even the smallest concentrations of carbon monoxide. This technology enables the detector to activate swiftly, providing early warnings and potentially saving lives. With a detection range of 0-300 parts per million, the device is capable of identifying dangerous CO levels that may emerge from everyday appliances such as gas boilers, fireplaces, and stoves.

The device boasts a compact and stylish design, allowing it to blend seamlessly into any home environment. With its easy-to-read digital display, users can monitor CO levels in real-time, giving them immediate awareness of potential hazards. The display also features a backlit option, making it convenient to read in low-light conditions, ensuring that it remains user-friendly around the clock.

Another key characteristic of the Kidde KN-COPD-3-UK is its audible alarm, which is set to emit a series of loud beeps when it detects elevated levels of carbon monoxide. This alarm is complemented by visual alerts that flash when CO is present, ensuring that occupants are promptly informed of the situation. The device is also equipped with a test/reset button, allowing users to check its functionality easily.

For ease of installation, the Kidde KN-COPD-3-UK is designed to be wall-mounted or placed on a shelf, providing flexibility depending on user preferences. Importantly, the device features a battery backup, ensuring continuous operation even in the event of a power outage, enhancing overall reliability.

With a lifespan of up to 10 years, this carbon monoxide detector is an investment in safety that requires minimal maintenance. Its energy-efficient design adds to its appeal, ensuring that it operates effectively without excessive power consumption.

Overall, the Kidde KN-COPD-3-UK offers a robust combination of advanced sensor technology, user-friendly features, and reliable performance, making it an essential addition to any household looking to safeguard against the hazards of carbon monoxide.
Top Page Image Contents