Kidde KN-COPD-3-UK manual Features

Page 6

2520-7203-00.qxd 2006.4.7 3:50 PM Page 4

Features

Your CO Alarm

The feature that sets this Kidde alarm apart from other alarms is the unique digital display that gives you a continuous readout of CO levels from 30-999 parts per million. The digital display serves as an early warning of CO presence.

This Kidde alarm gives you the choice of a direct-plug unit, a wall mount unit, or tabletop unit all in one.

Kidde CO Alarm Unique Features

Digital Display

The continuous digital display indicates the level of carbon monoxide (if any) the unit is sensing. The unit updates this reading every 15 sec- onds so you can watch CO levels rise or fall.

Note: If the unit does not sense any CO, the display reading is zero (0). In most homes, the unit reads “0” all the time. A reading of “0” is expected under normal conditions, and is good. The blinking dot after the number indicates that the unit is operating.

Test/Reset Button

This button has two functions. First, this is the button you press when you test the unit weekly (see “How to test your CO Alarm” section). It’s also used when resetting the peak level memory.

Peak Level Button

By pressing this button, you can see the peak CO level recorded by the alarm since it was last cleared or unplugged. This Kidde alarm feature allows you (or heating contractor or fireman) to see exactly how big a CO problem you have so you can react accordingly.

Sensors

The CO sensor is a highly sensitive, electrochemical sensor that is CO specific to help avoid false alarms.

Sounder Alarm

This is the loud 85 decibel pulsing alarm that will sound to alert you to a potential problem.

Pullout Transformer/Adapter

This unique Kidde alarm feature enables the alarm to be used as a direct plug unit, a wall mounted unit or a tabletop unit.

9 Volt Backup Battery

This CO Alarm is not battery operated. The 9 volt battery is to supply a short-term backup power during a power cut. In the event of a power cut, a fully charged 9 volt battery will continue operating the alarm for at least 20 hours, during battery backup conditions.

When installing a fresh battery, use either an Energizer 522, Duracell MX1604 or MN1604, or for extended battery life an Ultralife lithium power cell model U9VL. Any of these batteries can usually be purchased where you bought the alarm or at your local hardware store.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Carbon Monoxide Alarm Table of Contents Qxd 2006.4.7 350 PM Quick Set Up Guide Introduction Carbon MonoxideFeatures Where to Install Your CO Alarm What Carbon Monoxide Can and Cannot DoInstallation Mounting ConfigurationWhere Not to Install Your CO Alarm How to Install Your CO Alarm Direct Plug Alarm Wall Mounted AlarmTable Top Alarm Normal Operating CharacteristicsLow Battery Warning How to Test Your CO AlarmNormal Operation Malfunction Signal Group 1 Component Failure How to Know If Your Alarm is MalfunctioningIf the alarm malfunctions Malfunction Signal Group 2 Microprocessor FailureHow to Care for Your Alarm Effects of CO Exposure To Reset the Peak Level Memory…Peak Level Memory Button Your Family at Risk for CO PoisoningWhere CO Comes From Home Safety Tips What You Can DoWhat You Can do to Protect Your Family What You Should Know Before the Alarm Sounds Indicators of Possible CO LeaksHidden Causes of CO Emission What You Should Not DoEffects of Carbon Monoxide Exposure Effects of Carbon Monoxide ExposureWhat To Do When The Alarm Sounds What to Do When the Alarm Sounds for Carbon MonoxideHaemoglobin test. This test measures the amount of CO What To Do When The Alarm Sounds WAdjacent to the residence Immediately after CO exposure. Acute CO poisoning is usuCall a Qualified Technician to Find and Repair the Problem Sometimes it’s Difficult to Find the Source of CO in a HomeTest/Reset Button Product SpecificationsBattery Backup Technical InformationHow the Unit Determines When to Alarm Replacement of the AlarmAccuracy of the Digital Display Alarm Display ReadingsSound Action Plug into AC asWarranty For Warranty Service Questions or for More Information

KN-COPD-3-UK specifications

The Kidde KN-COPD-3-UK is an advanced carbon monoxide detector that provides crucial protection against the dangers of CO gas, a silent and deadly threat often produced by faulty appliances or insufficient ventilation. Designed for residential use, the device integrates cutting-edge technologies and user-focused features to ensure the safety and peace of mind of families across the UK.

One of the standout features of the KN-COPD-3-UK is its electrochemical sensor, which is highly reliable and sensitive to even the smallest concentrations of carbon monoxide. This technology enables the detector to activate swiftly, providing early warnings and potentially saving lives. With a detection range of 0-300 parts per million, the device is capable of identifying dangerous CO levels that may emerge from everyday appliances such as gas boilers, fireplaces, and stoves.

The device boasts a compact and stylish design, allowing it to blend seamlessly into any home environment. With its easy-to-read digital display, users can monitor CO levels in real-time, giving them immediate awareness of potential hazards. The display also features a backlit option, making it convenient to read in low-light conditions, ensuring that it remains user-friendly around the clock.

Another key characteristic of the Kidde KN-COPD-3-UK is its audible alarm, which is set to emit a series of loud beeps when it detects elevated levels of carbon monoxide. This alarm is complemented by visual alerts that flash when CO is present, ensuring that occupants are promptly informed of the situation. The device is also equipped with a test/reset button, allowing users to check its functionality easily.

For ease of installation, the Kidde KN-COPD-3-UK is designed to be wall-mounted or placed on a shelf, providing flexibility depending on user preferences. Importantly, the device features a battery backup, ensuring continuous operation even in the event of a power outage, enhancing overall reliability.

With a lifespan of up to 10 years, this carbon monoxide detector is an investment in safety that requires minimal maintenance. Its energy-efficient design adds to its appeal, ensuring that it operates effectively without excessive power consumption.

Overall, the Kidde KN-COPD-3-UK offers a robust combination of advanced sensor technology, user-friendly features, and reliable performance, making it an essential addition to any household looking to safeguard against the hazards of carbon monoxide.
Top Page Image Contents