Kidde KN-COPD-3-UK manual How to Install Your CO Alarm

Page 9

2520-7203-00.qxd 2006.4.7 3:50 PM Page 7

Installation

Do not install this alarm to a switch- or dimmer-controlled outlet if pos- sible.

Do not install in areas where the temperature is colder than 4.4°C (40°F) or hotter than 37.8°C (100°F). These areas include uncondi- tioned crawl spaces, attics, porches and garages. Extreme tempera- tures will affect the sensitivity of the alarm.

Do not install this unit near deep cell large batteries. Large batteries have emissions that can cause the alarm to perform at less than opti- mum performance.

Avoid the following:

•Excessive spillage or reverse venting of fuel burning appliances caused by outdoor ambient conditions, such as:

1)Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/humid air with extended periods between cycles).

2)Negative pressure differential resulting from the use of exhaust fans.

3)Simultaneous operation of several fuel burning appliances com- peting for limited internal air.

4)Vent pipe connections vibrating loose from a clothes drier, fur- nace or water heater.

5)Obstructions in or unconventional vent pipe designs which can amplify the above situations.

•Extended operation of unvented fuel burning devices (range, oven, fireplace, etc.).

•Temperature inversions that can trap exhaust gasses near the ground.

•Car idling in an open or closed attached garage, or near a home.

How to Install Your CO Alarm

Your Kidde CO Alarm with its removable adapter allows you to install the alarm as a wall mounted unit, a direct plug unit, or as a table top unit.

Refer to Where to Install Your CO Alarm for general guidelines.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Carbon Monoxide Alarm Table of Contents Qxd 2006.4.7 350 PM Quick Set Up Guide Carbon Monoxide IntroductionFeatures What Carbon Monoxide Can and Cannot Do Where to Install Your CO AlarmInstallation Mounting ConfigurationWhere Not to Install Your CO Alarm How to Install Your CO Alarm Wall Mounted Alarm Direct Plug AlarmNormal Operating Characteristics Table Top AlarmLow Battery Warning How to Test Your CO AlarmNormal Operation If the alarm malfunctions How to Know If Your Alarm is MalfunctioningMalfunction Signal Group 1 Component Failure Malfunction Signal Group 2 Microprocessor FailureHow to Care for Your Alarm Peak Level Memory Button To Reset the Peak Level Memory…Effects of CO Exposure Your Family at Risk for CO PoisoningWhere CO Comes From Home Safety Tips What You Can DoWhat You Can do to Protect Your Family Indicators of Possible CO Leaks What You Should Know Before the Alarm SoundsWhat You Should Not Do Hidden Causes of CO EmissionEffects of Carbon Monoxide Exposure Effects of Carbon Monoxide ExposureWhat to Do When the Alarm Sounds for Carbon Monoxide What To Do When The Alarm SoundsAdjacent to the residence What To Do When The Alarm Sounds WHaemoglobin test. This test measures the amount of CO Immediately after CO exposure. Acute CO poisoning is usuSometimes it’s Difficult to Find the Source of CO in a Home Call a Qualified Technician to Find and Repair the ProblemBattery Backup Product SpecificationsTest/Reset Button Technical InformationHow the Unit Determines When to Alarm Replacement of the AlarmAccuracy of the Digital Display Alarm Display ReadingsSound Plug into AC as ActionWarranty For Warranty Service Questions or for More Information

KN-COPD-3-UK specifications

The Kidde KN-COPD-3-UK is an advanced carbon monoxide detector that provides crucial protection against the dangers of CO gas, a silent and deadly threat often produced by faulty appliances or insufficient ventilation. Designed for residential use, the device integrates cutting-edge technologies and user-focused features to ensure the safety and peace of mind of families across the UK.

One of the standout features of the KN-COPD-3-UK is its electrochemical sensor, which is highly reliable and sensitive to even the smallest concentrations of carbon monoxide. This technology enables the detector to activate swiftly, providing early warnings and potentially saving lives. With a detection range of 0-300 parts per million, the device is capable of identifying dangerous CO levels that may emerge from everyday appliances such as gas boilers, fireplaces, and stoves.

The device boasts a compact and stylish design, allowing it to blend seamlessly into any home environment. With its easy-to-read digital display, users can monitor CO levels in real-time, giving them immediate awareness of potential hazards. The display also features a backlit option, making it convenient to read in low-light conditions, ensuring that it remains user-friendly around the clock.

Another key characteristic of the Kidde KN-COPD-3-UK is its audible alarm, which is set to emit a series of loud beeps when it detects elevated levels of carbon monoxide. This alarm is complemented by visual alerts that flash when CO is present, ensuring that occupants are promptly informed of the situation. The device is also equipped with a test/reset button, allowing users to check its functionality easily.

For ease of installation, the Kidde KN-COPD-3-UK is designed to be wall-mounted or placed on a shelf, providing flexibility depending on user preferences. Importantly, the device features a battery backup, ensuring continuous operation even in the event of a power outage, enhancing overall reliability.

With a lifespan of up to 10 years, this carbon monoxide detector is an investment in safety that requires minimal maintenance. Its energy-efficient design adds to its appeal, ensuring that it operates effectively without excessive power consumption.

Overall, the Kidde KN-COPD-3-UK offers a robust combination of advanced sensor technology, user-friendly features, and reliable performance, making it an essential addition to any household looking to safeguard against the hazards of carbon monoxide.
Top Page Image Contents