Kidde KN-COPD-3-UK manual Technical Information, Product Specifications, Battery Backup

Page 23

2520-7203-00.qxd 2006.4.7 3:50 PM Page 21

Technical Information

Product Specifications

Power: 230V AC units: 50 Hz, Current 120 mA max.

Sensor: CO sensor calibrated at 150 ppm (±25 ppm).

Temperature: Operating range: 40˚F (4.4˚C) to 100˚F (37.8˚C).

Mounting: Accessories supplied for wall mount or direct plug applications.

Alarm: 85+ dB at 10’ @ 3.4 ± 0.5 KHz pulsing alarm. In alarm condition for CO you will hear a repeating pattern of quick beeps.

LED Operation: Blinking dot on display denotes normal operation. Display readings from 30-999 during elevated CO concentrations Red LED flashes in unison with alarm sounder during alarm and fault modes.

Green LED is on constantly while the unit is powered with 230 volts and flashes every 15 seconds while on battery backup.

Yellow LED flashes when the battery is low and is on constantly when the alarm malfunctions.

Battery Backup:

A 9 volt battery is needed. If battery is low or missing while the unit is plugged into a 230V outlet, an “Lb” message will display which will blink alternately with a the CO reading every second and the sounder will chirp every 15 seconds.

Unit Malfunction:

“Err” error message will display. Intermittent alarm will sound every 30 seconds.

Test/Reset Button:

Test button verifies proper unit operation and resets the unit in the event of a CO Alarm.

Peak Level Memory Button:

When pressed, LED will display the highest CO ppm level detected since unit was powered up or since unit was reset with test button. Reading will be stored in memory as long as unit is not reset or unplugged. Any CO concen- tration detected from 11-999 will be displayed

Size: 15.2 cm (6”)L x 3.75”W x 1.8”H. Wt. 1 lb.

Warranty: Five-year warranty from date of purchase against defects in material and workmanship.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Carbon Monoxide Alarm Table of Contents Qxd 2006.4.7 350 PM Quick Set Up Guide Carbon Monoxide IntroductionFeatures What Carbon Monoxide Can and Cannot Do Where to Install Your CO AlarmWhere Not to Install Your CO Alarm InstallationMounting Configuration How to Install Your CO Alarm Wall Mounted Alarm Direct Plug AlarmNormal Operating Characteristics Table Top AlarmNormal Operation Low Battery WarningHow to Test Your CO Alarm Malfunction Signal Group 2 Microprocessor Failure How to Know If Your Alarm is MalfunctioningIf the alarm malfunctions Malfunction Signal Group 1 Component FailureHow to Care for Your Alarm Your Family at Risk for CO Poisoning To Reset the Peak Level Memory…Peak Level Memory Button Effects of CO ExposureWhat You Can do to Protect Your Family Where CO Comes FromHome Safety Tips What You Can Do Indicators of Possible CO Leaks What You Should Know Before the Alarm SoundsWhat You Should Not Do Hidden Causes of CO EmissionEffects of Carbon Monoxide Exposure Effects of Carbon Monoxide ExposureWhat to Do When the Alarm Sounds for Carbon Monoxide What To Do When The Alarm SoundsImmediately after CO exposure. Acute CO poisoning is usu What To Do When The Alarm Sounds WAdjacent to the residence Haemoglobin test. This test measures the amount of COSometimes it’s Difficult to Find the Source of CO in a Home Call a Qualified Technician to Find and Repair the ProblemTechnical Information Product SpecificationsBattery Backup Test/Reset ButtonAccuracy of the Digital Display How the Unit Determines When to AlarmReplacement of the Alarm Sound AlarmDisplay Readings Plug into AC as ActionWarranty For Warranty Service Questions or for More Information

KN-COPD-3-UK specifications

The Kidde KN-COPD-3-UK is an advanced carbon monoxide detector that provides crucial protection against the dangers of CO gas, a silent and deadly threat often produced by faulty appliances or insufficient ventilation. Designed for residential use, the device integrates cutting-edge technologies and user-focused features to ensure the safety and peace of mind of families across the UK.

One of the standout features of the KN-COPD-3-UK is its electrochemical sensor, which is highly reliable and sensitive to even the smallest concentrations of carbon monoxide. This technology enables the detector to activate swiftly, providing early warnings and potentially saving lives. With a detection range of 0-300 parts per million, the device is capable of identifying dangerous CO levels that may emerge from everyday appliances such as gas boilers, fireplaces, and stoves.

The device boasts a compact and stylish design, allowing it to blend seamlessly into any home environment. With its easy-to-read digital display, users can monitor CO levels in real-time, giving them immediate awareness of potential hazards. The display also features a backlit option, making it convenient to read in low-light conditions, ensuring that it remains user-friendly around the clock.

Another key characteristic of the Kidde KN-COPD-3-UK is its audible alarm, which is set to emit a series of loud beeps when it detects elevated levels of carbon monoxide. This alarm is complemented by visual alerts that flash when CO is present, ensuring that occupants are promptly informed of the situation. The device is also equipped with a test/reset button, allowing users to check its functionality easily.

For ease of installation, the Kidde KN-COPD-3-UK is designed to be wall-mounted or placed on a shelf, providing flexibility depending on user preferences. Importantly, the device features a battery backup, ensuring continuous operation even in the event of a power outage, enhancing overall reliability.

With a lifespan of up to 10 years, this carbon monoxide detector is an investment in safety that requires minimal maintenance. Its energy-efficient design adds to its appeal, ensuring that it operates effectively without excessive power consumption.

Overall, the Kidde KN-COPD-3-UK offers a robust combination of advanced sensor technology, user-friendly features, and reliable performance, making it an essential addition to any household looking to safeguard against the hazards of carbon monoxide.
Top Page Image Contents