Kidde KN-COPD-3-UK manual How to Know If Your Alarm is Malfunctioning, If the alarm malfunctions

Page 13

2520-7203-00.qxd 2006.4.7 3:50 PM Page 11

Normal Operation

While on AC power, in the event of a CO incident, the alarm pattern will continue to repeat as long as CO is present.

NOTE: Pressing the Test/Reset button tests the functions of the alarm’s internal components, circuitry and micro-computer.

YOU DO NOT NEED TO PRESS THE TEST BUTTON TO TAKE A CO READING. CO readings are automatically shown on the alarm’s digital display. If the alarm indicates zero (0), then no measurable amount of CO has been sensed by the alarm within the past 15 seconds.

How to Know If Your Alarm is Malfunctioning

Your alarm performs an internal self-diagnosis every 15 seconds to make sure that it is functioning properly. The alarm is designed to alert you in the unusual event of a malfunction.

If the alarm malfunctions

In the rare event that your alarm malfunctions, it will alert you with one of these signal groups (depending upon the type of malfunction that occurs):

Malfunction Signal Group 1 - Component Failure

–An intermittent “chirping” alarm will sound every 30 seconds.

–An “Err” message will appear on the digital display,

–The yellow LED will light continuously, and

–The unit does not respond to pressing the Test button.

OR,

Malfunction Signal Group 2 - Microprocessor Failure

–The alarm will sound continuously,

–The digital display will be blank,

–The yellow LED will light continuously

–The alarm cannot be shut off by pushing “Test/Reset” button, and,

–The unit is receiving sufficient power from the 230 volt outlet or fresh battery.

Unplug the alarm immediately and return for warranty exchange (see “Warranty” on back page).

What to do if you’re not sure...

PLEASE familiarize yourself with the malfunction alert, Do not confuse these signals with an alarm. After reading the information above, if you are still unsure whether your alarm is operating properly, call the Kidde Freephone Customer Hotline at 0800 917 0722 to do a quick diagnostic check of the alarm over the phone. The customer service representa- tive will be able to assist you and answer your questions.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Carbon Monoxide Alarm Table of Contents Qxd 2006.4.7 350 PM Quick Set Up Guide Carbon Monoxide IntroductionFeatures What Carbon Monoxide Can and Cannot Do Where to Install Your CO AlarmMounting Configuration InstallationWhere Not to Install Your CO Alarm How to Install Your CO Alarm Wall Mounted Alarm Direct Plug AlarmNormal Operating Characteristics Table Top AlarmHow to Test Your CO Alarm Low Battery WarningNormal Operation If the alarm malfunctions How to Know If Your Alarm is MalfunctioningMalfunction Signal Group 1 Component Failure Malfunction Signal Group 2 Microprocessor FailureHow to Care for Your Alarm Peak Level Memory Button To Reset the Peak Level Memory…Effects of CO Exposure Your Family at Risk for CO PoisoningHome Safety Tips What You Can Do Where CO Comes FromWhat You Can do to Protect Your Family Indicators of Possible CO Leaks What You Should Know Before the Alarm SoundsWhat You Should Not Do Hidden Causes of CO EmissionEffects of Carbon Monoxide Exposure Effects of Carbon Monoxide ExposureWhat to Do When the Alarm Sounds for Carbon Monoxide What To Do When The Alarm SoundsAdjacent to the residence What To Do When The Alarm Sounds WHaemoglobin test. This test measures the amount of CO Immediately after CO exposure. Acute CO poisoning is usuSometimes it’s Difficult to Find the Source of CO in a Home Call a Qualified Technician to Find and Repair the ProblemBattery Backup Product SpecificationsTest/Reset Button Technical InformationReplacement of the Alarm How the Unit Determines When to AlarmAccuracy of the Digital Display Display Readings AlarmSound Plug into AC as ActionWarranty For Warranty Service Questions or for More Information

KN-COPD-3-UK specifications

The Kidde KN-COPD-3-UK is an advanced carbon monoxide detector that provides crucial protection against the dangers of CO gas, a silent and deadly threat often produced by faulty appliances or insufficient ventilation. Designed for residential use, the device integrates cutting-edge technologies and user-focused features to ensure the safety and peace of mind of families across the UK.

One of the standout features of the KN-COPD-3-UK is its electrochemical sensor, which is highly reliable and sensitive to even the smallest concentrations of carbon monoxide. This technology enables the detector to activate swiftly, providing early warnings and potentially saving lives. With a detection range of 0-300 parts per million, the device is capable of identifying dangerous CO levels that may emerge from everyday appliances such as gas boilers, fireplaces, and stoves.

The device boasts a compact and stylish design, allowing it to blend seamlessly into any home environment. With its easy-to-read digital display, users can monitor CO levels in real-time, giving them immediate awareness of potential hazards. The display also features a backlit option, making it convenient to read in low-light conditions, ensuring that it remains user-friendly around the clock.

Another key characteristic of the Kidde KN-COPD-3-UK is its audible alarm, which is set to emit a series of loud beeps when it detects elevated levels of carbon monoxide. This alarm is complemented by visual alerts that flash when CO is present, ensuring that occupants are promptly informed of the situation. The device is also equipped with a test/reset button, allowing users to check its functionality easily.

For ease of installation, the Kidde KN-COPD-3-UK is designed to be wall-mounted or placed on a shelf, providing flexibility depending on user preferences. Importantly, the device features a battery backup, ensuring continuous operation even in the event of a power outage, enhancing overall reliability.

With a lifespan of up to 10 years, this carbon monoxide detector is an investment in safety that requires minimal maintenance. Its energy-efficient design adds to its appeal, ensuring that it operates effectively without excessive power consumption.

Overall, the Kidde KN-COPD-3-UK offers a robust combination of advanced sensor technology, user-friendly features, and reliable performance, making it an essential addition to any household looking to safeguard against the hazards of carbon monoxide.
Top Page Image Contents