MicroDock II
Maintenance
4. Allow the battery to obtain a full charge (2 to 4 hours, |
| Maintenance |
| ||
depending upon how many docking modules are con- |
| a Warning |
nected to this station). |
| |
If a docking module is in queue waiting to charge, the |
| No |
CHARGE LED flashes red (all charging modules). |
| a Caution |
When the docking module begins charging, the |
| |
| Confirm that the inlet filter is free of dirt and replace if | |
CHARGE LED stops flashing and lights solid red. |
| required. To order replacement parts, refer to |
The CHARGE LED lights green when the charging |
| Replacement Parts and Accessories in the MicroDock II |
| Base Station User Manual. | |
process is complete. If there are other docking mod- |
| |
|
| |
ules in queue, waiting to charge, they will begin |
| To maintain the station in good operating condition, perform the |
charging. |
| following basic maintenance as required. |
The CHARGE LED deactivates when the detector is |
| • Clean the exterior with a soft, damp cloth. Do not use sol- |
removed. |
| vents, soaps, or polishes. |
|
| • Do not immerse the station in liquids. |
|
|
|
13