Honeywell MicroDock II manual Are not setup correctly

MicroDock II

Quick Reference Guide

The base station pushbuttons are not labelled. The base station		Confirm Inlet Setup
is operated by pressing the C pushbutton that is located		For initial station activation, ensure the inlets are installed cor-
directly below the option that displays on the LCD.
		rectly.
Activating the Station
		• Inlet 1—default connection for ambient air.
1. To activate the station, press and hold C (the left-
		• Inlet 2—default connection for four-gas mix (unless oth-
	most button) until the following screen displays.		erwise specified when purchased).
		• Inlets 3-5—designed connection for additional gases.
			However, unless specified at purchase, inlets 3-5 will be
			configured for ambient air.
				a Warning
	The normal operation screen then displays.	Failed bump tests and calibrations can result if the inlets
		are not setup correctly.
		To confirm that the inlets are set correctly, complete the follow-
		ing:
		1.	Press C menu to access the user options menu.
Deactivating the Station		2.	Press C or	to scroll to InletSetup.
To deactivate the station, complete the following:		3. Press C sel to access the inlet 1 screen.
1.	Access the normal operation screen (the station can
	only deactivate from the normal operation screen).
2.	Press C off.
		4.	Press the C	to scroll to the inlet 2, 3, 4, and 5
			screens.

8