Emerson UT-P+-STXXXX, MA N-00 05-00 user manual

Page 42

<Enclosure Material:

Copper Free Cast Alum inum

<W eight:

3.2Kg (7.0 lb)

<Certifications:

CSA and NRTL/C certified for hazardous locations. Class I, Division 1, Groups B, C and D, NEMA 4X and 7. IEC Rating Ex d IIB+H2 T5

NOTE: Electronics only - CSA and NRTL/C certified for hazardous locations Class I, Division 2 Groups B, C and D pending.

<Current Output:

4-20 mA Into a maxim um loop im pedance of 800 Ohm s at 32 Vdc or 150 Ohm s at 10.5 Vdc. Isolated or non-isolated loop supply. Configurable Fault, Low and High alarm s.

<Relay Output:

Form C contacts rated 1 Am p at 30 Vdc, 0.5 Am p at 125 Vdc. Selectable energized/de-energized, latching/non-latching

36

Image 42
Contents UNI-TRAN Premium Plus Toxic GAS Detector UT-P+-STXXXX Page Page Page Table of Contents Page Features IntroductionIntroduction Location of Sensors Installation and Start UpWhat’s in the package UnpackingMounting Toxic Detector LayoutDimensional Drawings Page Page Page Wiring Sensor Separation Page Wiring Diagrams Page Page Page Page Page Installation Checklist Start UpRelay Settings Default Relay SettingsSummary of Main Menu Exit Return to normal if no option is selectedReview Settings System CalibrationCalibration Procedure Page Operation Periodic Response CheckOperator Interface Calibration Procedure Table of ResponsesMagnetic Reed Switch Activation Relay Settings Review Settings Hardware Start DelaySensor Fault Sensor DriftRelays 20 mATroubleshooting Sensor LifeGlossary of Terms Ordering Information Published in a ccordance w ith E1A standard Appendix B Wire Resistance In Ohms AWGAppendix C Specifications Sensor SpecificationsPage