Lighting the Power Burner
Electronic Ignition
1.Lift the cover.
2.Keep your face as far away from the burners as possible.
3.Turn the burner knob counter clockwise past the light position to HIGH. You will hear a loud click as the electronic lighter pro- duces a spark.
4.Listen for the sound of the gas igniting. If the burner does not light on the first try, repeat immediately.
5.If the burner does not light after three attempts, turn the con- trol knobs to the OFF position. Wait five minutes until the gas clears before attempting to light it again.
6.Repeat the procedure or try the manual lighting procedure be- low.
7.Upon successful lighting, repeat the process on the other burner.
8.To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when the burners are turned off.
Manual Lighting
WARNING: Do not use standard matches or cigarette lighters. Seri- ous burns can occur and lighters can explode.
1.Lift the cover.
2.If you have just attempted to light the burner, allow five minutes for any accumulated gas to dissipate.
3.Keep your face as far away from the burners as possible.
4.Light a long stem match or butane lighter, holding it near the burners.
5.Push in and turn the control knob just past the LIGHT position to HIGH.
6.Listen for the sound of the gas igniting. If the burner does not light after five seconds, turn the control knobs to the OFF posi- tion. Wait five minutes until the gas clears before attempting to light it again.
7.If the burner does not light after several attempts, see trouble- shooting procedures on page 23.
Power Burner
13
UsingYour Grill
LTR50001100, Rev. A | www.calflamebbq.com |