Cal Flame BBQ11955P Installation / Assembly, Using Your Power Burner, Cleaning and Maintenance

Page 2

Installation / Assembly

Cabinet Cut-out Dimensions

.

.5

LP Gas

 

. 6

Natural Gas

.

8

Leak Testing Procedure . . . . . . . . . . . . . . . . . . 9

Placing the Power Burner in a Built-in Enclosure . . .

.10.

Using Your Power Burner

 

 

Power Burner Controls

..11

Basic Operation

..12

Lighting the Power Burner

.13

Power Burner Lid . . . . . . . . . . . . . . . . . . . . ..14

Using the Wok Ring

..15

Cleaning and Maintenance

 

 

Removing and Replacing Burners

.16

Stainless Steel Care and Cleaning

.18

Covering Your Power Burner . . . . . . . . . . . . . . .22. . . . . .

Appendix

Troubleshooting . . . . . . . . . . . . . . . . . . . . ..23. . . . . . .

Converting from LP to NG . . . . . . . . . . . . . . . . .26. . . . . . .

Limited Warranty . . . . . . . . . . . . . . . . . . . . ..30. . . . . . .

Locating the Product Serial Number . . . . . . . . . . .34. . . .

Save these instructions!

Copyright 2011 LMS, Inc. All rights re- served. Duplication without written consent is strictly prohibited.

Cal Flame ® is a registered trademark.

Due to continuous improvement programs, all models, operation, and/or specifications are subject to change without prior notice.

LTR50001100, Rev. A 4/26/11

250-403

CONTACT INFORMATION

For customer service, please contact your authorized dealer immediately. If you need additional information and/or assistance, please contact:

Customer Service Department

1462 East Ninth Street

Pomona, CA 91766

Toll Free: 1-800-CAL-SPAS

Fax: 1-909-629-3890

www.calflamebbq.com

Page 1 Page 3
Image 2
Page 1 Page 3
Contents
Page Cleaning and Maintenance Installation / AssemblyUsing Your Power Burner AppendixSet-Up Placement and LocationCal Flame Power Burner is designed for outdoor use only Operation What To Do If You Smell GasStorage Maintenance and RepairPrecautions Regarding Children Installation / Assembly Converting the Power BurnerCabinet Cut-out Dimensions Tank Requirements Cylinder SpecificationLP Gas LP Gas Hook Up Transporting and Storing LP GasConnection Natural GasRequirements Leak Testing Procedure Placing the Power Burner in a Built-in Enclosure Using Your Power Burner Power Burner ControlsBasic Operation Manual Lighting Lighting the Power BurnerElectronic Ignition Power Burner Lid Using the Wok Ring Must always be in place during operationRemoving and Replacing Burners RemovalReplacement Stainless Steel Care and Cleaning Cleaning Products and Materials CLRPolish CleanRinse FireRust Removal BurnersDrip Pan Covering Your Power BurnerSteam Cleaning Your Power Burner Problem Burner does not ignite TroubleshootingProblem Smell of gas is present Problem Obstruction in the gas line Problem Plugged orificeProblem Burner tube is misaligned over the orifice Problem Yellow FlameProblem Misalignment of Igniter on Burner Problem FlashbackConverting from LP to NG You must perform both stepsSwitching the regulator Not providedChanging the burner orifices AppendixMark the rating plate Orifice sizes Inner burner Outer burnerWarranty Performance Limited WarrantyExtent of Warranty Warranty LimitationsDisclaimers Customer Service Legal RemediesPower Burner Locating the Product Serial Number Don’t forget to register your new product at
Top Page Image Contents