24 Appendix
Problem: Plugged orifice
Solution: Unplug the orifice as follows:
•Remove grate and grease tray.
•Remove the burner ring and the outer burner.
•Carefully lift the center burner up and away from the gas orifice.
•Remove the orifice from the control valve.
•Gently clear any obstruction with a fine wire.
•Reinstall the orifice, reinstall the burners over the orifices, and place the burner peg into position hole at the bottom ledge of the firebox.
•Replace cooking components and grease tray.
If an obstruction is suspected in the control valve, con- tact your local Cal Flame dealer for assistance.
Problem: Burner tube is misaligned over the orifice
Solution: Reposition the burner tube so that it is properly seated over the orifice.
Problem: Obstruction in the gas line
Solution: Remove the fuel line from Power Burner. (Do not smoke or perform any maintenance in the vicinity of an open flame.) Open the gas valve for one second to blow out any debris. Close off the gas valve and reconnect the fuel line securely.
Problem: Yellow Flame
Solution: Some yellow at the tips may be present due to impuri- ties in the fuel. If the flame is golden or yellow in color, the reason could be seasoning salts, oil film, or other foreign matter on the burner.
You may also need to adjust the venturis. If you are using propane, they should be completely open. If you are using NG, they should be open 1/4 to 1/2 way. (See page 16 to see location of the venturis.)
Power Burner
www.calflamebbq.com | LTR50001100, Rev. A |