Beckett CF1000 manual Explosion and Fire Hazard, Hot Gas Puff-back Heavy Smoke Hazard

Page 15

‰Set appliance limit controls

ySet the appliance limit controls in accordance with the appliance manufacturer’s recommendations.

‰Prepare the fuel unit for air venting

yTo vent air from one-pipe oil systems, attach a clear hose to the vent plug on the fuel unit. Provide a container to catch the oil. Loosen the vent plug.

yVent the air as described under Start the burner.

Start the Burner

Explosion and Fire

Hazard

Failure to follow these instructions could lead to equipment malfunction and result in heavy smoke emission, soot-up, hot gas puff-back, fire and asphyxiation hazards.

yDo not attempt to start the burner when excess oil has accumulated in the appliance, the appliance is full of vapor, or when the combustion chamber is very hot.

yDo not attempt to re-establish flame with the burner running if the flame becomes extinguished during start- up, venting, or adjustment.

yVapor-Filled Appliance: Allow the unit to cool off and all vapors to dissipate before attempting another start.

yOil-Flooded Appliance: Shut off the electrical power and the oil supply to the burner and then clear all ac- cumulated oil before continuing.

yIf the condition still appears unsafe, contact the Fire De- partment. Carefully follow their directions.

yKeep a fire extinguisher nearby and ready for use.

‰Starting the burner and venting air

Hot Gas Puff-back and

Heavy Smoke Hazard

Failure to bleed the pump properly could result in unstable combustion, hot gas puff-back and heavy smoke.

yDo not allow oil to intermittently spray into a hot com- bustion chamber while bleeding.

yInstall a gauge in the nozzle discharge port tubing or fully open the pump bleed valve to prevent oil spray from accumulating in the combustion chamber when venting air from the fuel pump.

yEnsure that all bubbles and froth are purged from the oil supply system before tightening the pump air bleed valve.

1.Verify that the air adjusting plate (Figure 12, item m) has been set to the initial air position as described on page 14 under Initial air settings.

2.Open the oil shut-off valves in the oil supply (and return) line(s) to the burner.

3.Set the thermostat (or operating control) to call for heat.

4.Close the line switch to the burner. The burner motor should start immediately.

Form 6104 BCF10-R06

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents To the Professional, Qualified Installer or Service Agency Potential for Fire, Smoke and Asphyxiation HazardsTo the Homeowner or Equipment Owner Form 6104 BCF10-R06 Table of Contents Indicates an imminently Hazardous situation Specifications Agency approvalsAdequate Combustion Ventilation Air Supply Required Follow These Instructions ExactlyProtect Against Stray Light Lockout Protect Against Dust MoistureCorrect Nozzle and Flow Rate Required Oil Supply Pressure Con- trol Required‰ Verify firing rate ‰ Vent system‰ Electrical supply ‰ Verify burner components‰ Mount air tube to burner ‰ Install nozzleProtect the Air Tube From Overheating ‰ Mount flanges on air tube‰ Set dimension Z ‰ Install nozzle line assembly‰ Oil supply/return lines Do Not Install By-pass Plug with 1-Pipe System‰ Insert burner ‰ Fuel unit by-pass plug‰ Burner fuel flow Install Oil Supply To SpecificationsElectrical Shock Hazard Do Not Bypass Safety ControlsProfessional Installation Service Required Keep Service Access Cov- ers Securely InstalledSequence of Operation typical ‰ Z dimension‰ Adjusting plate assembly Figure ‰ Initial air settings Figure‰ Initial head position Figure ‰ Prepare the fuel unit for air venting Explosion and Fire HazardHot Gas Puff-back Heavy Smoke Hazard ‰ Set appliance limit controls‰ Set air adjusting plate Figure Annual Professional Service Required Monthly maintenance by ownerAnnual service by qualified service techni- cian Replacement parts Form 6104 BCF10-R06 Warranty

CF1000 specifications

The Beckett CF1000 is a cutting-edge, reliable, and efficient commercial burner designed for use in various heating applications. Known for its exceptional performance, it is increasingly popular among businesses and contractors looking for an effective solution to meet their heating needs.

One of the main features of the CF1000 is its advanced combustion technology. The burner is engineered to deliver optimal combustion efficiency, reducing emissions and enhancing fuel economy. This technology not only helps in lowering operational costs but also aligns with modern environmental regulations, making the CF1000 a responsible choice for energy-conscious businesses.

Another notable characteristic of the CF1000 is its ability to handle multiple fuel types, including oil and natural gas. This versatility allows users to choose the best fuel source for their specific application, contributing to operational flexibility. Additionally, the CF1000 is equipped with a modulation system that adjusts the burner output in response to demand, ensuring consistent heating without unnecessary energy consumption.

The CF1000 also stands out for its compact design, making it easy to install in various settings, whether in commercial buildings or industrial facilities. Its robust construction is designed to withstand demanding conditions, ensuring longevity and reliability. Moreover, the burner comes with advanced safety features, including flame monitoring and integrated shut-off systems, helping to prevent potential hazards during operation.

Ease of maintenance is another significant advantage of the Beckett CF1000. The design incorporates user-friendly service access points, allowing technicians to perform routine maintenance and inspections quickly and efficiently. This not only ensures optimal performance but also extends the lifespan of the burner.

Furthermore, the CF1000 is supported by Beckett's extensive customer service and technical support. Their commitment to quality and satisfaction means that users can rely on expert assistance whenever needed, ensuring peace of mind.

Overall, the Beckett CF1000 is a premier choice for those seeking a high-performance commercial burner. With its advanced combustion technology, versatile fuel options, compact design, and a wealth of safety features, it delivers reliable heating solutions suitable for a wide range of applications. Its ease of maintenance combined with robust support services makes the CF1000 an intelligent investment for any business prioritizing efficiency, safety, and reliability in their heating systems.
Top Page Image Contents