Do Not Install By-pass Plug with 1-Pipe System

Insert burner

yPosition the burner in the front of the appliance and loosely tighten the nuts on the mounting studs. The burner should be pitched downward 2° as shown in Figures 2 and 3.

ySee Figure 7. Install the pedestal support kit (recommend- ed) by attaching the ¾” NPT ﬂange (item a) to the bottom of the burner using the (4) #10 screws provided. Cut and thread (one end only) a ¾” pipe nipple (item b) with length 10 inches less than dimension D in Figure 7. Thread the pipe into the ﬂange. Then slip the pipe end into the ﬂoor ﬂange (item c).

ySecure the burner to the appliance by tightening the nuts on the burner ﬂange mounting studs. Then secure the pedestal support ﬂoor ﬂange set screw to the pipe.

Connect Fuel Lines

Fuel unit by-pass plug

Do Not Install By-pass

Plug with 1-Pipe System

Failure to comply could cause immediate pump seal failure, pressurized oil leakage and the po- tential for a ﬁre and injury hazard.

yThe burner is shipped without the by-pass plug in- stalled.

yIntall the by-pass plug in two-pipe oil supply systems ONLY.

yUse a two-pipe system, one-pipe system with by-pass loop, or remove the by-pass plug when using with a one-pipe system and no by-pass loop

Oil supply/return lines

yInstall the oil tank and oil lines in accordance with all applicable state and local codes.

ySize the oil supply and return lines using the guidelines given in the fuel unit literature included in the literature envelope. Oil line ﬂow rate will equal the burner rate for one-pipe systems. For two-pipe systems, refer to Table 3 for the fuel unit gear set capacity - the rate at which fuel is recirculated when connected to a two-pipe system. Size two-pipe oil lines based on this ﬂow rate.

yUse continuous lengths of heavy-wall copper tubing, routed under the ﬂoor where possible. Do not attach fuel lines to the appliance or to ﬂoor joists if possible. This will reduce vibration and noise transmission problems.

yInstall an oil ﬁlter sized to handle the fuel unit gearset ﬂow capacity (Table 3) for two-pipe systems. Size the ﬁlter for the ﬁring rate for one-pipe systems. Locate the ﬁlter immediately adjacent to the burner fuel unit.

yInstall two high-quality shut-off valves in accessible locations on the oil supply line. Locate one valve close to the tank. Locate the other valve close to the burner, upstream of the fuel ﬁlter.

Figure 7 - Burner installed in appliance front

Legend

H Housing total length — 18”

J Center to bottom of housing — 10-7/8”

K Overall housing height — 13-3/8”

10	Form 6104 BCF10-R06

CF1000 specifications

The Beckett CF1000 is a cutting-edge, reliable, and efficient commercial burner designed for use in various heating applications. Known for its exceptional performance, it is increasingly popular among businesses and contractors looking for an effective solution to meet their heating needs.

One of the main features of the CF1000 is its advanced combustion technology. The burner is engineered to deliver optimal combustion efficiency, reducing emissions and enhancing fuel economy. This technology not only helps in lowering operational costs but also aligns with modern environmental regulations, making the CF1000 a responsible choice for energy-conscious businesses.

Another notable characteristic of the CF1000 is its ability to handle multiple fuel types, including oil and natural gas. This versatility allows users to choose the best fuel source for their specific application, contributing to operational flexibility. Additionally, the CF1000 is equipped with a modulation system that adjusts the burner output in response to demand, ensuring consistent heating without unnecessary energy consumption.

The CF1000 also stands out for its compact design, making it easy to install in various settings, whether in commercial buildings or industrial facilities. Its robust construction is designed to withstand demanding conditions, ensuring longevity and reliability. Moreover, the burner comes with advanced safety features, including flame monitoring and integrated shut-off systems, helping to prevent potential hazards during operation.

Ease of maintenance is another significant advantage of the Beckett CF1000. The design incorporates user-friendly service access points, allowing technicians to perform routine maintenance and inspections quickly and efficiently. This not only ensures optimal performance but also extends the lifespan of the burner.

Furthermore, the CF1000 is supported by Beckett's extensive customer service and technical support. Their commitment to quality and satisfaction means that users can rely on expert assistance whenever needed, ensuring peace of mind.

Overall, the Beckett CF1000 is a premier choice for those seeking a high-performance commercial burner. With its advanced combustion technology, versatile fuel options, compact design, and a wealth of safety features, it delivers reliable heating solutions suitable for a wide range of applications. Its ease of maintenance combined with robust support services makes the CF1000 an intelligent investment for any business prioritizing efficiency, safety, and reliability in their heating systems.

Insert burner