Beckett CF1000 ‰ Vent system, ‰ Electrical supply, ‰ Verify burner components, ‰ Verify air tube

Page 7

yThe fuel unit nozzle port pressure is factory set at 300 psig. Some original equipment manufacturer burner applications may call for a lower pressure to obtain a required firing rate. Do not change this pressure unless directed to do so by the appliance manufacturer.

‰Vent system

yThe flue gas venting system must be in good condition and must comply with all applicable codes.

‰Electrical supply

yVerify that the power connections available are correct for the burner. All power must be supplied through fused dis- connect switches.

‰Verify burner components —

yBurner box, Model CF1000

yAir tube assembly

yMounting flange kit

yPedestal mounting assembly kit (recommended)

yOil nozzle, per Table 1 — Only 45° to 70° solid pattern nozzles are recommended unless otherwise specified by appliance manufacturer. (See specific appliance recom- mendation sheet or refer to OEM Spec Guide). Find the required firing rate in the 300 psig column (factory-set fuel unit pressure). Select the corresponding nozzle from col- umn 1 (Rated gph @ 100 psig).

‰Verify firing rate

yRefer to appliance manufacturer’s instructions (if available) for firing rate and nozzle selection. Otherwise, the maximum recommended firing rate for the burner depends on the length of the firing chamber and the distance from the burner center to the chamber floor. Verify that the chamber dimensions are at least as large as the minimum values given in Figure 1. If the appliance dimensions are smaller than recommended, reduce the firing rate accordingly.

‰Verify air tube

yThe information in this section may be disregarded if the air tube is supplied by the appliance manufacturer.

yTwo tube arrangements are available –

Tube A — 4.0 to 10.0 GPH per Table 2

Figure 1. Min. Combustion Chamber Dimensions

 

 

Minimum Dimensions

 

Firing Rate

 

 

 

 

 

 

(refractory-lined)

(wet-base boilers)

 

 

 

 

 

 

 

 

A

 

L

A

 

L

0 to 5 gph

7.0”

 

25.0”

7.0”

 

25.0”

5 to 10 gph

8.0”

 

35.0”

8.0”

 

40.0”

Figure 2 - Air Tube Mounting Dimensions

E Insertion depth

G Air tube to inside of chamber 0.25” +/- 0.125

T Air tube length D Tube diameter

Install the burner with a 2 deg. pitch as shown

Tube B — 7.0 to 10.0 GPH per Table 2

yMaximum firing capacity depends on the firebox pressure. Use Table 2 to verify the correct air tube type for the firing rate required. Use Tube B only when Tube A cannot pro- vide the firing rate required.

ySee Figure 2 to verify the correct air tube length and air tube combination code.

Air Tube Length

(Dimension T)

06.75” 10.25” 13.75” 17.75”

A.T.C. Codes

(A.T.C. = Air Tube Combination)

Tube A

Tube B

(Dim. D = 5-1/2”)

(Dim. D = 5-3/4”)

CF66KD

CF66KE

CF102KD

CF102KE

CF136KD

CF136KE

CF176KD

CF176KE

 

 

Form 6104 BCF10-R06

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Potential for Fire, Smoke and Asphyxiation Hazards To the Professional, Qualified Installer or Service AgencyTo the Homeowner or Equipment Owner Form 6104 BCF10-R06 Table of Contents Indicates an imminently Hazardous situation Specifications Agency approvalsAdequate Combustion Ventilation Air Supply Required Follow These Instructions ExactlyProtect Against Stray Light Lockout Protect Against Dust MoistureCorrect Nozzle and Flow Rate Required Oil Supply Pressure Con- trol Required‰ Verify firing rate ‰ Vent system‰ Electrical supply ‰ Verify burner components‰ Mount air tube to burner ‰ Install nozzleProtect the Air Tube From Overheating ‰ Mount flanges on air tube‰ Set dimension Z ‰ Install nozzle line assembly‰ Oil supply/return lines Do Not Install By-pass Plug with 1-Pipe System‰ Insert burner ‰ Fuel unit by-pass plug‰ Burner fuel flow Install Oil Supply To SpecificationsElectrical Shock Hazard Do Not Bypass Safety ControlsProfessional Installation Service Required Keep Service Access Cov- ers Securely InstalledSequence of Operation typical ‰ Z dimension‰ Initial air settings Figure ‰ Adjusting plate assembly Figure‰ Initial head position Figure ‰ Prepare the fuel unit for air venting Explosion and Fire HazardHot Gas Puff-back Heavy Smoke Hazard ‰ Set appliance limit controls‰ Set air adjusting plate Figure Monthly maintenance by owner Annual Professional Service RequiredAnnual service by qualified service techni- cian Replacement parts Form 6104 BCF10-R06 Warranty

CF1000 specifications

The Beckett CF1000 is a cutting-edge, reliable, and efficient commercial burner designed for use in various heating applications. Known for its exceptional performance, it is increasingly popular among businesses and contractors looking for an effective solution to meet their heating needs.

One of the main features of the CF1000 is its advanced combustion technology. The burner is engineered to deliver optimal combustion efficiency, reducing emissions and enhancing fuel economy. This technology not only helps in lowering operational costs but also aligns with modern environmental regulations, making the CF1000 a responsible choice for energy-conscious businesses.

Another notable characteristic of the CF1000 is its ability to handle multiple fuel types, including oil and natural gas. This versatility allows users to choose the best fuel source for their specific application, contributing to operational flexibility. Additionally, the CF1000 is equipped with a modulation system that adjusts the burner output in response to demand, ensuring consistent heating without unnecessary energy consumption.

The CF1000 also stands out for its compact design, making it easy to install in various settings, whether in commercial buildings or industrial facilities. Its robust construction is designed to withstand demanding conditions, ensuring longevity and reliability. Moreover, the burner comes with advanced safety features, including flame monitoring and integrated shut-off systems, helping to prevent potential hazards during operation.

Ease of maintenance is another significant advantage of the Beckett CF1000. The design incorporates user-friendly service access points, allowing technicians to perform routine maintenance and inspections quickly and efficiently. This not only ensures optimal performance but also extends the lifespan of the burner.

Furthermore, the CF1000 is supported by Beckett's extensive customer service and technical support. Their commitment to quality and satisfaction means that users can rely on expert assistance whenever needed, ensuring peace of mind.

Overall, the Beckett CF1000 is a premier choice for those seeking a high-performance commercial burner. With its advanced combustion technology, versatile fuel options, compact design, and a wealth of safety features, it delivers reliable heating solutions suitable for a wide range of applications. Its ease of maintenance combined with robust support services makes the CF1000 an intelligent investment for any business prioritizing efficiency, safety, and reliability in their heating systems.
Top Page Image Contents