Cleaning the Steam Wand, Using the Allen KEY

CARE & CLEANING

CLEANING THE STEAM WAND

•Immediately after texturing milk, wipe the steam wand with a damp cloth and purge (by lifting the STEAM LEVER for a few seconds).

•If any of the holes in the tip of the steam wand become blocked, ensure the STEAM LEVER is in the CLOSED position and clean using the pin on the end of the provided cleaning tool.

•If steam wand remains blocked, remove the tip using the integrated spanner in the cleaning tool and soak in hot water. Screw tip back onto the steam wand using the integrated spanner in the cleaning tool.

CLEANING THE FILTER BASKETS AND Portafilter

•The filter baskets and portafilter should be rinsed under hot water directly after use to remove all residual coffee oils.

•If the holes in the filter baskets become blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.

CLEANING THE SHOWER SCREEN

•The group head interior and shower screen should be wiped with a damp cloth to remove any ground coffee particles.

•Periodically purge the machine with hot water (see ‘Advanced Functions’, page 19) with the filter basket and portafilter in place, without ground coffee, to rinse out any residual coffee.

CLEANING THE DRIP & STORAGE TRAY

•The drip tray should be removed, emptied and cleaned after each use or when the drip tray indicator is showing Empty Me!

•Remove grill from the drip tray. Wash both in warm soapy water. The Empty Me! indicator can also be removed from the drip tray.

•The storage tray can be removed and cleaned with a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).

CLEANING THE OUTER HOUSING & CUP WARMING TRAY

•The outer housing and cup warming tray can be cleaned with a soft, damp cloth. Polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

NOTE

Do not clean any of the parts or accessories in the dishwasher.

CARE & CLEANING

USING THE ALLEN KEY

Over time, the silicone seal surrounding the shower screen will need to be replaced to

ensure optimum brewing performance.

1.Press the Power button to turn the machine Off and unplug the cord from the power outlet.

2.Carefully remove the rear water tank and drip tray, taking particular care if they are full.

3.Using a skewer or similar, clean

the center of the screw of any residual coffee.

4.Insert the shorter end of the Allen Key into the center of the screw. Turn counter-clockwise to loosen the screw.

Clean center of screw before inserting Allen Key

5.Once loosened, carefully remove and retain the screw, stainless steel shower screen and black dispersion plate. Make note of the side of the shower screen and dispersion plate that are facing downwards. This will make re-assembly easier. Wash the shower screen and dispersion plate in warm soapy water, then dry thoroughly.

6.Remove the silicone seal with your fingers or a pair of long-nose pliers. Insert the new seal, flat side first, so the ribbed side is facing you.

7.Re-insert the dispersion plate, then the shower screen, then the screw. With your fingers, turn the screw clockwise for 2-3 revolutions then insert the Allen Key to tighten until the screw is flush with the shower screen.

8.Re-insert the drip tray and rear water tank.

Contact Breville Consumer Service or visit www.breville.com for replacement silicone seals or for advice.

30		31

BES900XL specifications

The Breville BES900XL, also known as the Dual Boiler Espresso Machine, is a high-performance espresso maker designed for home baristas who seek professional quality in the comfort of their kitchen. This machine combines innovative technology with user-friendly features to create exceptional espresso beverages, making it a popular choice among coffee enthusiasts.

One of the standout features of the BES900XL is its dual boiler system. Unlike traditional espresso machines that use a single boiler for both brewing and steaming, this model utilizes two separate stainless steel boilers. This design allows for simultaneous brewing and steaming, which is essential for producing café-quality drinks like lattes and cappuccinos. With the ability to maintain consistent temperatures, the dual boilers ensure that the espresso extraction and milk frothing processes occur perfectly.

Temperature control is another key characteristic of the Breville BES900XL. It offers precise PID (Proportional-Integral-Derivative) temperature control, which enables users to select and maintain the ideal brewing temperature. This precision is critical for extracting the best flavors and aromas from coffee grounds, enhancing the overall espresso experience.

Additionally, the BES900XL features a shot clock, which helps users monitor the timing of their espresso extraction. This built-in timer assists in achieving the ideal shot duration, allowing for a more consistent and delicious brew. The machine also boasts a large water tank with a capacity of 84 ounces, reducing the frequency of refills during busy brewing sessions.

The BES900XL is equipped with a powerful steam wand for frothing milk. This steam wand features a 360-degree rotation, enabling baristas to create various milk textures and designs with ease. The manual control allows users to adjust the pressure and steam as needed, ensuring that they can achieve the desired microfoam for their coffee creations.

Durability is another essential aspect of the Breville BES900XL, which is built with high-quality materials and components. Its brushed stainless steel construction not only gives it a sleek appearance but also ensures longevity and resilience in daily use.

With its wealth of features, including dual boilers, precise temperature control, and a powerful steam wand, the Breville BES900XL caters to coffee lovers looking to elevate their espresso-making skills. Whether crafting a morning espresso or delivering a sophisticated latte art, this machine empowers users to achieve professional results at home.