Lenovo 3000Y410 UG.book Page 6 Friday, September 14, 2007 1:37 PM
Caring for Your Computer
•Before you install any of the following devices, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device.
–ExpressCard
–Memory Card, such as SD Card, Memory Stick, MultiMediaCard,
–Memory module
–PCI Express Card
•When transferring data to or from a Flash Media Card, such as an SD card, do not put your computer in sleep or hibernation mode before the data transfer is complete. To do so might cause damage to your data.
Cleaning the Cover of Your Computer
Occasionally clean your computer as follows:
1.Prepare a mixture of a gentle
2.Absorb the diluted detergent into a sponge.
3.Squeeze excess liquid from the sponge.
4.Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5.Wipe the surface to remove the detergent.
6.Rinse the sponge with clean running water.
7.Wipe the cover with the clean sponge.
8.Wipe the surface again with a dry, soft
9.Wait for the surface to dry completely and remove any cloth fibers from the computer surface.
Cleaning Your Computer Keyboard
1.Absorb some isopropyl rubbing alcohol on a soft,
2.Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth may hook onto an adjacent key and possibly damage it. Make sure that no liquid drips onto or between the keys.
3.Allow to dry.
4.To remove any crumbs and dust from beneath the keys, you can use a camera blower with a brush or cool air from a hair drier.
Note: Avoid spraying cleaner directly on the display or the keyboard.
6Lenovo 3000 Y410 User Guide