Lenovo 3000 Y410 warranty Replacing Memory

Lenovo 3000Y410 UG.book Page 49 Friday, September 14, 2007 1:37 PM

Replacing Memory

To install an SO-DIMM, do the following:

1.Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, that could damage the SO-DIMM. Do not touch the contact edge of the SO-DIMM.

2.Turn off the computer; then disconnect the ac adapter and all cables from the computer.

3.Close the computer display, and turn the computer over.

4.Remove the battery.

5.Unfasten the two screws a on the cover and remove the cover b.

2

1

1

6.Find the notch on the contact edge side of the SO-DIMM.

Attention: To avoid damaging the SO-DIMM, do not touch its contact edge.

7.With the notched end of the SO-DIMM toward the contact edge side of the socket, insert the SO-DIMM into the socket at an angle of about 20 degrees, then press it in firmly a.

1

8.Push the SO-DIMM down until it snaps into place.

2 1

Chapter 5. Upgrading and Replacing Devices 49