7.Pull electrode out of bracket.
A
B 
A. Grasp electrode here.
B.Bracket
8.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.
A
A. Gas orifice spud
9.Gas orifice studs are stamped with a letter and a number. Install the Number 105 oven bake burner orifice spud.
10.Place Natural gas orifice in plastic parts bag for future use and keep with package containing literature.
11.Push down on the clip on the electrode bracket.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
12.Replace oven bake burner electrode inside bracket.
B
A
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
13.Reinstall the oven bake burner and oven bake burner screws. See Step 5 for illustration.
18