PROPANE
SUPPLY
INSTALLATION
6
Propane gas and propane tank(s) are to be furnished by the user.
Use this heater only with a propane vapor withdrawal supply system.
The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount:
1.The amount of propane gas in tank(s)
2.The temperature of tank(s)
The chart below shows the number of
| Temperature °C (°F) At Tank |
| |||
4,5 °C | 0 °C | ||||
(40 °˚F) | (32 °F) | (20 °F) | (0 °F) | ||
Number of tanks 3 | (Use larger tank below 4,5°C [40°F]) |
| |||
Less gas is vaporized at lower temperatures. You may need a larger tank in colder weather. Your local propane gas dealer will help you select the proper supply system.
WARNING
WARNING ICON | G 001 |
Review and understand the warnings in the Safety Information Section, page 3. They are needed to safely operate this heater. Follow all local codes when using this heater.
WARNING
WARNING ICON | G 001 |
Test all gas piping and connections for leaks after installa- tion or servicing. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.
1.Provide propane supply system (see Propane Supply above).
2.Connect POL fitting on hose/regulator assembly to propane tank(s). Turn POL fitting counterclockwise into threads on tank. Tighten firmly using
2,22 cm (7/8 in.) wrench. IMPORTANT: Tighten regulator with black adjust- ment knob pointing down. Pointing adjustment knob down protects regulator from weather damage.
| POL Fitting |
Supply | Hose |
Valve |
|
| Regulator |
Propane |
|
Tank | Adjustment |
| Knob |
| (pointing down) |
Figure 3 - Regulator With Adjustment Knob Pointing Down
100165