Empire Comfort Systems VFSUR18-2, VFSUR24-2 Requirements for Canada, Important Safety Information

Page 8

REQUIREMENTS FOR CANADA

This unit cannot be installed in a UNVENTED application, this unit can only be installed as a VENTED application with these requirements.

IMPORTANT SAFETY INFORMATION

This unit complies with ANSI Z21.60and CGA 2.26 Decorative Gas Appliances For Installation In Solid Fuel Burning Fireplaces. Do not burn wood or solid fuels in a fireplace where a decorative gas log set is installed. This appliance is for installation only in a solid fuel burning fireplace, masonry fireplace or manufactured fireplace.

Warning: Any modification to this gas log set or to controls can be dangerous. Improper installation or use of the gas log set can cause serious injury or death from fire, burns, explosion or carbon monoxide poisoning.

1.Please follow all local codes regarding installation, combus- tion and ventilation air or in the absence of local codes follow the National Fuel Gas Code ANSI Z223.1(U.S. installation), or CAN/CGA-B149, Installation Code (Canada installation).

2.Proper installation, burner pan location and log placement is important to achieve optimum look and performance of your gas log set. The logs have been designed for easy location and placement on the grate and must be followed for proper operation.

3.Do not operate this log set with glass doors in the closed po- sition. A fireplace screen must be in place when the log set is burning. Adequate combustion air must be provided for proper venting. All flames should go up and out the top of the firebox into the flue vent. If any flames float or curl forward into the room do not operate appliance. Check for an open flue and adequate combustion air into the room. A damper clamp must be installed on the firebox damper to maintain an open flue vent condition. Refer to page 13 INSTALLING

DAMPER CLAMP

4.Young children must be carefully supervised when they are in the same room as the gas log while in operation. Do not place stockings, clothing or any flammable material above or near the fireplace.

5.Do not substitute or use materials other than those supplied for use with the log set.

6.Also refer to IMPORTANT SAFETY INFORMATION on page 4 of this manual

WARNING; DO NOT OPERATE THIS GAS LOG SET WITH GLASS DOORS CLOSED

Clothing or other flammable material should not be placed on or near the appliance.

Do not place trash or other articles on the log set during op- eration.

During manufacturing, fabricating and shipping, various components of this appliance are treated with certain oils, films or bonding agents. These bonding agents are not harm- ful but may produce annoying smoke and smells as they are burned off during initial operation of the appliance. This is a normal temporary occurrence. A window should be opened during the initial bake out period.

Keep burner and control compartment clean.

WARNING: Before installing in a solid fuel burning fire- place, the chimney flue and firebox must be cleaned of soot, creosote, ashes and loose paint by a qualified chimney clean- er.

Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpet- ing, bedding materials, etc. It is imperative that control com- partments, burners and circulating air passageways of the ap- pliance be kept clean.

Do not put anything around the fireplace that will obstruct the flow of ventilation air.

Do keep the appliance area clear and free from combustible material, gasoline and other flammable vapors and liquids.

A yearly examination and cleaning of the venting system of the solid-fuel burning fireplace must be performed by a quali- fied agency.

Do make a periodic visual check of pilot and burners. Clean and replace damaged parts.

Do not use this appliance if any part has been under water.

Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

Never burn solid fuels in fireplace where a gas log set is in- stalled.

This unit complies with ANSI Z21.60 Decorative Vented

Appliances for Solid Fuel Burning Fireplaces. State or local codes may only allow operation of this appliance in a vented configuration. Check your state or local codes.

Page 8

25741-0-0309

Image 8
Contents Empire Table of Contents Carton Contents Hardware PackageImportant Safety Information Carbon Monoxide Poisoning MAY Lead to DeathSafety Information for Users of LP-GAS LP-GAS Warning OdorIntroduction New InstallationWell Head Gas Installations Make sure you have received all parts General InformationBefore you get started Important Safety Information Requirements for CanadaWater Vapor a BY-PRODUCT of Unvented Room Heaters Unusually Tight ConstructionInstalling as a Vented Appliance ClearancesGlass Doors Mantel Clearances Without Hood FigureMantel Clearances with Hood Figure Floor Clearance FigureCombustible Material Fireplace PreparationInstalling Damper Clamp Figure Installing AS a Vented ApplianceBefore Fully Installing the Appliance Installing a New Main Gas Cock Pressure Testing of the Gas Supply SystemGAS Supply Recommended Gas Pipe DiameterPlacing Lava Rock in Front of Burner on Fireplace Floor Placement of Glowing Embers and Lava RockOperation INSTRUCTIONS/FLAME Appearance VFSUR-18,24,30-2 Lighting Instructions What to do if YOU Smell GASBurner Instructions Lighting the multisided burnerTurn OFF Heater and Allow to Cool Before Cleaning Pilot Flame CharacteristicsCleaning and Servicing Wiring Gas odor even when control knob is in OFF position Heater produces a whistling noise when main burner is litAppliance produces unwanted odors Appliance shuts off during use. Pilot stays onHOW to Order Repair Parts Parts Not Under WarrantyWarranty Parts Master Parts Distributor ListVFSUR18N,P VFSUR24N,P VFSUR30N,P Parts ListIndex Part Number Description Parts View Comfort Systems

VFSUR18-2, VFSUR30-2, VFSUR24-2 specifications

Empire Comfort Systems is renowned for its innovative heating solutions, and the VFSUR series exemplifies their commitment to quality and performance. The VFSUR24-2, VFSUR30-2, and VFSUR18-2 models are direct vent, free-standing gas stoves that combine timeless design with modern technology, making them ideal for both heating and aesthetic enhancement in any living space.

One of the standout features of the VFSUR series is their impressive heating capacity. The VFSUR18-2 offers a maximum output of 18,000 BTUs, the VFSUR24-2 delivers 24,000 BTUs, and the VFSUR30-2 tops out at 30,000 BTUs. This range allows homeowners to choose a model that best fits their space and heating needs, effectively warming areas from smaller rooms to larger open living areas.

Another significant characteristic of the VFSUR models is their direct vent technology, which allows for safe and efficient ventilation. This system draws air from outside for combustion while expelling exhaust gases outside as well, creating a sealed combustion environment that enhances safety and minimizes heat loss. This technology also ensures that indoor air quality is maintained, making these stoves an excellent choice for energy-conscious homeowners.

The VFSUR series features a stylish design that incorporates a traditional look with modern elements. With various finish options and decorative doors, these stoves can complement any home décor. The large viewing window provides a cozy ambiance, allowing users to enjoy the beauty of the flames while the stove efficiently heats the space.

Additionally, the VFSUR models are equipped with an advanced millivolt system that allows for reliable operation even during power outages. This feature ensures that users will have continuous warmth regardless of external conditions. The models are also compatible with optional remote controls, providing convenience in adjusting settings from anywhere in the room.

In summary, Empire Comfort Systems VFSUR series – including the VFSUR24-2, VFSUR30-2, and VFSUR18-2 – represent a fusion of efficiency, safety, and style. With impressive BTU outputs, advanced direct vent technology, and aesthetic versatility, these gas stoves are perfect for anyone looking to enhance their home heating experience while enjoying the warmth and beauty of a traditional fireplace.