Humidifier Operations
Your new Emerson humidifier is designed to satisfy home humidity requirements through the principle of evaporation of water into the air.
After water is added to the bottle and positioned in the humidifier, the filters begin to soak up the water and become totally saturated in approximately 30 min- utes. Air is drawn in from the rear of the humidifier and through the filters by means of one circulation fan. As air passes through the filters, moisture is absorbed into the air and then released through the top of the humidifier. This moist air is released in the form of vapor. No water droplets will enter the home. All evapora- tion into the air takes place in the humidifi- er, which means that the residue left by evaporating water is not passed into the home, but remains in the filter.
.CAUTION: Use only liquid EPA
Registered Bacteriostat available from your local retail store or call
(800)
Humidified Air is
Then Released
Through the Top
Dry Air Enters
Through the
Rear
CAUTION: Keep your humidifier clean. While humidifiers do not cause colds, some studies suggest that dirty humidi- fiers can cause
Assembly
Your new Emerson MoistAIR humidifier is | Follow the instructions of this owner’s |
completely assembled for you to use. | manual for proper usage. |
Electrical Hook-Up
Locate nearest 120V A.C. wall socket in the location desired, preferably on inside wall. Plug in the electrical cord.
WARNING: To reduce the risk of fire or shock hazard, do not use extension cords. Humidifier should be plugged directly into a 120V A.C. outlet.
To reduce the risk of electrical shock, this humidifier has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
4