Location Instructions
WARNING: For your own safety, do not use humidifier if any parts are damaged or missing.
1.Place humidifier on a flat level surface in area of house where most humidity is needed, or an area which would likely result in moist air being circulated throughout the house, such as near a cold air return. Placing the unit level is very important if the humidifier is locat- ed on carpeting.
Moist air (humidity) produced will dis- perse into the whole house, but area closest to the unit will have the highest humidity. If the unit is positioned close to a window, condensation may form on the window pane. If this is not accept- able, the unit should be repositioned in another location.
NOTE: Due to release of cool, moist air from humidifier, it is best to direct air away from home thermostat and hot air registers. It is best to position humidifier
Water Fill
next to an inside wall. Hot air registers and cold air from outside walls can affect the efficiencies of the controls. Unit should not be placed where warm air from a hot air register blows directly on unit.
2.The humidifier should be positioned with the back (cord exit side), at least 2 inch- es away from the wall. Air needs to enter through louvers in the rear panel in order for the humidifier to operate at peak effi- ciency.
At Least 2" From Wall
WARNING: To reduce the risk of shock, always unplug humidifier before cleaning or servicing.
WARNING: To reduce the risk of fire or shock hazard, do not pour or spill water into control or motor area. If controls get wet, let them dry com- pletely and have unit checked by an authorized service personnel before plugging in.
This humidifier is designed for use with the water bottle located under the bottle cover to the left of the fan assembly. The unit should be positioned where it will be oper- ating.
Bottle Cover
Water
Bottle
5