Replacement and Care of Filters

WARNING: To reduce the risk of shock or injury from moving parts, always unplug humidifier before removing or replacing any parts.

CAUTION: To help retard bacteria growth and keep maximum efficien- cy, the filters should be replaced at least once a season, or more often under hard water conditions. Use only Emerson HDC-2R or HDC411 replacement filters.

NOTE: HDC411 provides two com- plete filter changes.

All filters may be rinsed in clear water only. Take care not to damage paper.

To replace the evaporative wicking filter in your Emerson humidifier, follow the instructions below:

1.Unplug humidifier, and proceed to clean.

Before removing the filters, we recom- mend moving the humidifier to an area where floor coverings are not suscepti- ble to water damage, i.e. kitchen or bath areas.

2.To remove parts:

Remove the water bottle cover. Lift the fan assembly and set aside on a clean flat surface. Remove water bottle. Lift and remove the filter housing from the cabinet and set to the side. The paper filters are now accessible.

Water Bottle Cover

Fan Assembly

Water Bottle

Cabinet

Water Level

Float

Retainer

Filter

Housing

Filters