Replacement and Care of Filters (continued)
3.a. Remove the two filters and dispose of properly.
b.Clean internal parts of the humidifier per the “Cleaning Your Humidifier” section of your owner’s manual.
c.Install new filters inside the cabinet with the glue beads on the filter fac- ing the center of the cabinet. Make sure the filters are resting on the floor of the cabinet.
d.Return the filter housing to the cabi- net. Position the filter housing onto the filters. Align the back of the filter housing over the filters and between the rear ribs of the cabinet. Place the filter housing down onto the filters. Make sure the filters are captured inside the side flanges of the filter housing.
e.Position fan assembly onto the cabi- net. Make sure the fan venturi (low- est cylinder section below the fan) is placed inside the filter housing. The left edge of the fan assembly hous- ing should rest in the groove of the cabinet.
f.Replace water bottle and the water bottle cover. The right edge of the water bottle cover should rest in the groove of the cabinet.
4.The unit is ready for use or to be stored away for the next season.
Water Level
Float
Float
Retainer
Filters
Water Level
Float
Float
Retainer
Filter
Housing
Glue Beads
“Channel Area”
Fan Assembly
Cabinet
Groove In
Cabinet
for Water
Bottle
Cover
10