Operating Humidifier Controls
The operating controls of your Emerson evaporative humidifier are located on the top right of the humidifier. The controls are found under the smoked cover
Lift the control cover by placing your finger in the round cutout and lifting. The cover will stay open. Now you can clearly see the con- trol area. Familiarize yourself with the con- trols and their functions as described below.
Humidity Control:
Adjust the amount of
humidity depending on your needs. The humidifier will turn on and off as required to maintain level of humidity selected. A medi- um setting (midway between and ) is recommended, but there are times when a low or high amount of humidity may be pre- ferred. For constant operation of humidifier, rotating knob all the way clockwise allows for the maximum amount of humidity to be evaporated into the air continuously.
IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity Control setting should be lowered until condensation no longer forms.
Air Flow (Speed) Control
The unit is adjusted from OFF “ ” to high
“” with a three speed rotary control.
The higher the air flow speed, the more water is evaporated and released into the air. Low speed " " is the quietest and is provided for conditions that may not require as high an evaporation rate.
Fill Light
When the unit has a small amount of water left in it, the fill light 
will come on and the unit will automatically shut off.
7