Select Location See Fig | Carrier HUMCCLFP1025-A manual

7.Saddle valve assembly with adapter

8.Four sheet metal screws

9.Foam tape

10.Noise suppressor (use for water pressure over 60 psi)

11.Worm clamp for field-supplied drain tube

12.Humidifier maintenance instruction sticker

13.Carrier logo label

"N" COIL

HORIZONTAL

VERTICALHORIZONTAL

A97098

Fig. 7ÐInstallation of HUMCCSFP1016-A--

Fan-Type Humidifier

Step 2Ð Select Location (See Fig. 7.)

Humidifier must be installed on supply plenum only. If furnace has air conditioning coil, be sure humidifier does not interfere with coil ends. Remember to provide clearance for maintenance and evapo- rator pad removal.

To reverse pad access from right to the left side:

1.Remove side door and media pad assembly.

2.Remove 4 screws and separate top assembly from lower mounting base. (See Fig. 8.)

3.Rotate lower mounting base 180 degrees, so side access door is now on left.

4.Snap together top assembly to mounting base and reinstall screws.

5.Replace media pad assembly (with distributor reservoir up) and side access door.

When re-installing media pad assembly into plastic housing, insure the assembly drain stub aligns into the drain outlet located in bottom of humidifier. Unit can leak if drain stub does not align with drain outlet. (See Fig. 9.)

IMPORTANT: Make sure front housing assembly with electrical cord is facing down.

Step 3ÐPrepare Plenum Opening (See Fig. 2.)

1.Use template for marking humidifier opening.

2.Tape in place on plenum making sure template is level.

A96049

Fig. 8ÐReversing Door Access

on HUMCCSFP1016-A--

	MEDIA PAD
	ASSEMBLY
	DRAIN
	OUTLET
HOUSING	VINYL DRAIN
ENCLOSURE	TUBING
DRAIN OUTLET
	A97108

Fig. 9ÐMedia Pad Assembly Installation

IMPORTANT: For humidifier to operate properly it must be level and mounted on a vertical surface.

3.Drill four 1/8-in. holes in plenum.

4.Cut opening in plenum using heavy solid lines on template as a guide.

Step 4ÐMount the Humidifier

1.Attach foam tape to back of mounting flange (exclude the off-set edge).

2.Hook off-set edge over opening cut in plenum.

3.Place humidifier in plenum aligning screw holes with flange.

4.Align, level, and tighten all screws for air tight seal.

Step 5ÐInstall Drain Line

1.Use 5/8-in. vinyl tubing (field supplied) to connect drain on bottom of humidifier housing to an open drain.

2.Use clamp to hold drain tubing in position over drain fitting outlet.

Unit may leak if drain tubing is misapplied. Do not insert tubing inside of drain fitting outlet.

3.Make sure line is free of traps due to sagging and has sufficient pitch to drain.

HUMCCLFP1025-A specifications

The Carrier HUMCCLFP1025-A is a high-performance air handling unit designed for modern commercial and industrial applications. This model stands out due to its advanced engineering, energy efficiency, and superior air quality management. It addresses the growing demand for effective climate control solutions while ensuring compliance with environmental regulations.

One of the primary features of the HUMCCLFP1025-A is its innovative design, which promotes optimal airflow and temperature regulation. The unit is equipped with a multi-speed fan system that allows for precise adjustments based on the requirements of the space. This flexibility ensures reduced energy consumption while maintaining comfort levels. Additionally, its advanced EC motor technology enhances operational efficiency, leading to significant energy savings over time.

The HUMCCLFP1025-A also incorporates a robust filtering system that captures airborne pollutants, allergens, and particulate matter. The unit utilizes high-efficiency filters, which improve the overall air quality while extending the life of the equipment. The integration of a demand-controlled ventilation system further maximizes efficiency by adjusting the airflow based on occupancy levels, ensuring that only the necessary amount of conditioned air is supplied.

Another noteworthy characteristic of this model is its modular construction. The HUMCCLFP1025-A can be easily customized to meet the specific requirements of various applications. This adaptability allows for easy installation and maintenance, making it a practical choice for building managers and HVAC contractors alike. The unit is designed for quiet operation, minimizing noise disruption in sensitive environments such as offices and healthcare facilities.

Furthermore, the Carrier HUMCCLFP1025-A features advanced connectivity options, including compatibility with Building Management Systems (BMS). This allows for remote monitoring and control, enabling operators to optimize performance and troubleshoot issues in real time. The integration of smart technologies enhances the unit's capabilities, making it a forward-thinking solution in HVAC systems.

In conclusion, the Carrier HUMCCLFP1025-A is a versatile and efficient air handling unit that combines sophisticated design, advanced technology, and superior air quality management. Its range of features, including energy efficiency, customizable configurations, and smart connectivity, make it an ideal choice for various commercial and industrial environments. As the demand for sustainable and effective climate control solutions continues to grow, the HUMCCLFP1025-A stands out as a reliable option that meets the needs of today and the future.