→ ÐMounting the Humidifier | Carrier HUMCCLFP1025-A specification

→Step 1ÐInspect Package and Check Equipment

Inspect contents of packaged humidifier. File claim with shipping company prior to installation if shipment is damaged or incom- plete.

The package should contain:

1.Humidifier and media assembly

2.Humidistat

3.Template

4.Owner's Manual

5.Warranty Certificate

6.Solenoid valve with bridge rectifier

7.Saddle valve assembly with adapter

8.Four sheet metal screws

9.Foam tape

10.Water noise reducer (use for water pressure over 60 psi)

11.6-in. damper

12.Worm clamp for field-supplied drain tube

13.Humidifier maintenance instruction sticker

14.Carrier logo label

BYPASS UNITS

"N" COIL

DRILL (2) HOLES

IN DUCT

FOR #8 SHEETMETAL

SCREWS

BYPASS UNITS ONLY	HORIZONTAL
VERTICAL
	A98363

→Fig. 1ÐInstallation of HUMCCLBP2018-A-- Bypass-Type Humidifier

Step 2ÐSelect Location (See Fig. 1.)

Humidifier may be installed on either supply or return plenum. If furnace has air conditioning coil, be sure humidifier does not interfere with coil ends. Remember to provide clearance for maintenance and evaporator pad removal.

Step 3ÐPrepare Plenum Opening (See Fig. 2.)

1.Use template for marking humidifier opening.

2.Tape in place on plenum making sure template is level.

IMPORTANT: For humidifier to operate properly it must be level and mounted on a vertical surface.

3.Drill four 1/8-in. holes in plenum.

4.Cut opening in plenum using heavy solid lines on template as a guide.

TEMPLATE

PLENUM

LEVEL

A97096

Fig. 2ÐPreparing Plenum Opening

FOAM TAPE

SCREWS

NOTCH

A98364

→Fig. 3ÐMounting the Humidifier

Step 4ÐMount the Humidifier (See Fig. 3.)

1.Attach foam tape on inside of mounting flange.

2.Hook bottom notch of humidifier on opening cut in plenum.

3.Push top of humidifier to plenum aligning screw holes with flange.

4.Align, level, and secure using top screws first.

5.Insert bottom screws and tighten all screws for air tight seal.

→Step 5ÐInstall Bypass Duct

Attach field-supplied 6-in. diameter duct, elbow, or starting collar with field-supplied 1/4-in. zip screws. Install supplied 6-in. damper in 6-in. duct connector.

IMPORTANT: On systems with central cooling, the damper should be closed during cooling season to prevent bypass air.

Do not support weight of bypass duct from humidifier Ð damage could result.

Step 6ÐInstall Drain Line

1.Use 1/2- or 5/8-in. vinyl tubing (field supplied) to connect drain on bottom of humidifier housing to an open drain.

→2. Use supplied worm clamp to hold drain tubing in position over drain fitting outlet.

Unit may leak if drain tubing is misapplied. Do not insert tubing inside of drain fitting outlet.

3.Make sure line is free of traps due to sagging and has sufficient pitch to drain.

HUMCCLFP1025-A specifications

The Carrier HUMCCLFP1025-A is a high-performance air handling unit designed for modern commercial and industrial applications. This model stands out due to its advanced engineering, energy efficiency, and superior air quality management. It addresses the growing demand for effective climate control solutions while ensuring compliance with environmental regulations.

One of the primary features of the HUMCCLFP1025-A is its innovative design, which promotes optimal airflow and temperature regulation. The unit is equipped with a multi-speed fan system that allows for precise adjustments based on the requirements of the space. This flexibility ensures reduced energy consumption while maintaining comfort levels. Additionally, its advanced EC motor technology enhances operational efficiency, leading to significant energy savings over time.

The HUMCCLFP1025-A also incorporates a robust filtering system that captures airborne pollutants, allergens, and particulate matter. The unit utilizes high-efficiency filters, which improve the overall air quality while extending the life of the equipment. The integration of a demand-controlled ventilation system further maximizes efficiency by adjusting the airflow based on occupancy levels, ensuring that only the necessary amount of conditioned air is supplied.

Another noteworthy characteristic of this model is its modular construction. The HUMCCLFP1025-A can be easily customized to meet the specific requirements of various applications. This adaptability allows for easy installation and maintenance, making it a practical choice for building managers and HVAC contractors alike. The unit is designed for quiet operation, minimizing noise disruption in sensitive environments such as offices and healthcare facilities.

Furthermore, the Carrier HUMCCLFP1025-A features advanced connectivity options, including compatibility with Building Management Systems (BMS). This allows for remote monitoring and control, enabling operators to optimize performance and troubleshoot issues in real time. The integration of smart technologies enhances the unit's capabilities, making it a forward-thinking solution in HVAC systems.

In conclusion, the Carrier HUMCCLFP1025-A is a versatile and efficient air handling unit that combines sophisticated design, advanced technology, and superior air quality management. Its range of features, including energy efficiency, customizable configurations, and smart connectivity, make it an ideal choice for various commercial and industrial environments. As the demand for sustainable and effective climate control solutions continues to grow, the HUMCCLFP1025-A stands out as a reliable option that meets the needs of today and the future.