American Power Conversion AFX Series manual Optional Features, Emergency, Environmental, External

Page 18

Optional Features

 

The following optional features are available on the AFX Series unless

 

otherwise noted. Certain combinations of options may not be available.

Emergency/

Smoke detector(s). The factory installed smoke detector(s) is designed to

environmental

sense smoke concentration in the return air stream. Upon detecting smoke

 

concentration an audible and visual alarm on the microprocessor will be

 

activated and the unit will immediately shut-down.

 

Firestat. A Firestat is available for installation in the air stream. If the return

 

air temperature reaches 125° F (52° C), the air conditioner will be turned off

 

and both an audible and visual alarm will be activated on the microprocessor.

 

Water detector(s). The solid-state water detector(s) activates an audible

 

and visual alarm on the microprocessor when moisture is detected. The water

 

detector is provided with 15' (5 m) of wire. Multiple detectors can be used in

 

the optional secondary drain pan in the sub floor.

 

Essential/non-essential lockout. When facilities have limited backup

 

power capacity, this lockout prevents the operation of electrical loads that are

 

not essential for continued site operation.

External

Floorstand. The heavy gauge floorstand raises the unit above the subfloor to

components

match the height of the raised floor. Heights are available from 6" to 36" (12"

 

to 36" for downflow units) in 3" increments and are adjustable +/- 1.5".

 

Adjustment is provided by threaded pedestals. Vibration absorbing pads are

 

included. The floorstand, pedestal and pads ship loose. Floorstands are

 

available for seismic applications.

 

Air deflector. An air deflector ships loose and attaches to the floorstand for

 

changing air direction from vertical to horizontal.

 

Plenum. The discharge plenum mounts on top of the upflow unit to direct

 

and distribute conditioned air. Manually adjustable, double deflecting grilles

 

are provided on 3 or 4 sides.Plenum shall be painted to match the color of the

 

unit.

 

Duct flange. A 1" (25 mm) duct flange is installed on a unit to provide

 

convenient connection to external ductwork. The duct flange can be installed

 

at the air outlet on upflow units, or at the air inlet on downflow units.

APC NetworkAIR AFX Series: Optional Features

13

Image 18
Contents NetworkAIRTM AFX Series Contents Guide Specifications Pump Specifications Page Upflow front-return Available ModelsDownflow Indoor top-discharge centrifugal condenserPage Capacity OverviewIntroduction Air patternHumidity control ConfigurationFront access ComplianceDwhu Model SelectionPage Standard Features MicroprocessorController Overall cabinet SetpointHumidifier Blower assemblyElectrical panel Electric reheatCondenser Clogged filter alarmCooling coil Air filterEmergency drain PanPage Environmental Optional FeaturesEmergency ExternalAPC NetworkAIR AFX Series Optional Features Reheat System ComponentsPage Performance Specifications Net cooling capacity-air/remote condensingModel Capacity in BTU/H Net cooling capacity-water 26T 28TNet cooling capacity-glycol Page Coolant requirements Performance DataAir system Pump systemFilters Water regulating valve-2-Way/3-Way, single seatedHumidification-solid state electrode canister Compressor-scrollHot water reheat Electric ReheatHot gas reheat Steam reheatConnection sizes Humidifier Electrical DataElectric Reheat-6-14 ton VoltageElectric Reheat-18-28 ton Steam/hot water/or no-reheat-6-14 ton Steam/hot water/or no-reheat-18-28 ton Indoor centrifugal condenser units Page Guide Specifications GeneralProduct APC NetworkAIR AFX Series Guide Specifications APC NetworkAIR AFX Series Guide Specifications APC NetworkAIR AFX Series Guide Specifications GPML/s at ft m external head, and operate on Ph, 60-Hz power Visual and audible alarm OptionsAPC NetworkAIR AFX Series Guide Specifications Page Dimensional Data Downflow-6-8 tonDownflow-10-18 ton Downflow-20-28 ton Upflow front-return-6-8 ton Upflow front-return-10-18 ton Upflow front-return-20-28 ton Upflow rear-return-6-8 ton Upflow rear-return-10-18 ton Upflow rear-return-20-28 ton Indoor rear-discharge centrifugal condenser-6-8 ton Indoor rear-discharge centrifugal condenser-10-18 ton Indoor rear-discharge centrifugal condenser-20-28 ton Indoor top-discharge centrifugal condenser-6-8 ton Indoor top-discharge centrifugal condenser-10-18 ton Indoor top-discharge centrifugal condenser-20-28 ton Page Air-Cooled Condensers and Drycoolers Key to the model numberAir-cooled condenser-physical data LbsAir-cooled condenser-electrical data Model TempFLA MCA MOP Single-fan air-cooled condenser-6 ton Dual-fan air-cooled condenser-6-14 ton Triple-fan air-cooled condenser-14-20 ton Dual-fan air-cooled condenser-20-26 ton Triple-fan air-cooled condenser-26-28 ton Glycol cooled drycooler-electrical data DrycoolerGlycol cooled drycooler-physical data Tonnage Ambient FLA MCA MOPDual-fan fluid cooler-6-8 ton Triple-fan fluid cooler-10-12 ton Dual-fan fluid cooler-14-18 ton Triple-fan fluid cooler-20-28 ton Page Pump Specifications Pump electrical dataFLA MCA Page Room preparation Guidelines for InstallationService access Unit locationFloorstand Power unitRigging Utility connectionsWater supply Page APC Worldwide Customer Support

AFX Series specifications

The American Power Conversion (APC) AFX Series is a groundbreaking line of uninterruptible power supplies (UPS) designed to meet the demands of modern businesses. APC, a subsidiary of Schneider Electric, is known for its reliable power management solutions that ensure the availability of critical equipment. The AFX Series stands out for its advanced features, cutting-edge technologies, and robust characteristics that cater to a diverse range of applications.

One of the standout features of the AFX Series is its flexible architecture. The series offers modular scalability, allowing users to expand power capacity as needed. This modular design is particularly beneficial for growing businesses that require a power solution that can adapt to changing demands without the need for a complete replacement. The AFX units boast a compact footprint, making them suitable for deployment in server rooms, data centers, or environments with space constraints.

Another significant characteristic of the AFX Series is its high efficiency. The UPS units are designed to operate at a remarkable efficiency level, often exceeding 95%, which translates into reduced energy consumption and lower operating costs. This efficiency not only benefits the environment but also enhances the overall reliability of power delivery.

In terms of technology, the AFX Series leverages advanced lithium-ion battery technology. Lithium-ion batteries have a longer lifespan and faster charge times compared to traditional lead-acid batteries. This innovation ensures that uptime is maximized, while maintenance efforts are minimized, allowing IT personnel to focus on more critical tasks.

The AFX Series is also equipped with intelligent monitoring and management features. Users can take advantage of real-time data and analytics through an intuitive web interface, providing insights into power performance and battery health. This capability aids in proactive maintenance, ensuring potential issues are addressed before they lead to downtime.

Furthermore, the AFX Series supports a range of connectivity options, including SNMP, USB, and serial interfaces. These options enable seamless integration into existing management systems, allowing for centralized monitoring and control.

In summary, the American Power Conversion AFX Series is a powerful solution for organizations seeking reliability, efficiency, and scalability in their UPS systems. With its modular architecture, high operational efficiency, advanced lithium-ion technology, and user-friendly management capabilities, the AFX Series is an exemplary choice for businesses aiming to safeguard their critical infrastructure against power interruptions.