American Power Conversion manual APC NetworkAIR AFX Series Guide Specifications

Page 39

Individual systems Air-cooled system. The air cooled system shall consist of an evaporator section including evaporator coil, blower package(s), controls and electrical section and compressor(s). The condenser section shall be as follows:

•Outdoor propeller fan condenser: The outdoor condenser casing shall be of aluminum, and all structural supports, coil frame, motor drive supports, and mounting legs shall be made of galvanized steel. The condenser shall have copper tubes expanded into aluminum fins. Headers and connections shall be copper. The coil shall be pressure tested and sealed for shipment. The condenser motors shall have permanently lubricated sealed ball bearings, with internal overload protection, and operate on __________-V, _____ -ph, 60-Hz power. Motors shall be mounted inside the condenser casing for weather protection, and shall be wired to a terminal strip in a weather-proof panel on the unit. The direct drive, aluminum fan blade and painted steel hub assembly, shall be protected by a heavy-gauge, vinyl-coated, steel-wire fan guard. On multiple units, each fan section shall be separated by full- width baffles to prevent bypass air. The condenser shall be sized for

_________ ° F (° C) ambient, and condensing temperature controls shall be fan speed for –20° F (–29° C) winter ambient. Flooded controls for – 40° F (– 40° C) optional.

•Indoor floor-mounted centrifugal fan condenser: The indoor floor mounted condenser shall be a draw-through design and include quiet belt-driven double-inlet centrifugal blower(s), and a condenser coil with copper tubes expanded into aluminum fins. Belt(s) shall be sized for 200% of the system horsepower. All components shall be housed in a corrosion-resistant, heavy-gauge, steel cabinet to match the evaporator section in finish and construction, equipment with 1" (25 mm) supply and return air-duct flanges. The condenser shall be sized for _______ ° F (° C) ambient with condensing temperature controls for – 40°F (– 40° C). The condenser section shall be remotely mounted suitable for

___________- V, _______ -ph, 60-Hz power.

•Models with air cooled condensing units: The air-cooled system shall consist of an evaporator section including evaporator coil, blower package(s), controls and electrical system. The remote air-cooled condensing unit, including compressor(s), shall be housed outdoors in a weather-resistant cabinet that shall allow service access through a hinged panel. The condenser coil shall have rifled copper tubes and enhanced aluminum fins. The coil shall be pressure-tested, and sealed for shipment. The condensing unit shall be equipped with scroll compressor(s) and crankcase heater(s), service valves, high and low pressure controls, receiver with fusible plug, liquid shut–off valve and charging port, liquid line filter–drier, and sight glass. The direct drive, propeller fan, condensing unit motor(s) shall have permanently lubricated sealed ball bearing, with internal overload protection, shall operate on _______ -V,_______ -ph, 60-Hz power, and shall be mounted inside the unit casing for weather protection. The standard condensing unit shall be sized for 95° F (35° C) ambient, and controls shall be flooded suitable for – 20° F (–29° C) winter ambient. Optional controls for –30° F (–34° C) shall included insulated and heated receiver. The condensing unit shall be field-wired and-piped to the evaporator section and shall be suitable for remote outdoor installation.

34

APC NetworkAIR AFX Series: Guide Specifications

Page 38 Page 40
Image 39
Page 38 Page 40
Contents NetworkAIRTM AFX Series Contents Guide Specifications Pump Specifications Page Indoor top-discharge centrifugal condenser Available ModelsDownflow Upflow front-returnPage Air pattern OverviewIntroduction CapacityCompliance ConfigurationFront access Humidity controlModel Selection DwhuPage Standard Features MicroprocessorController Setpoint Overall cabinetElectric reheat Blower assemblyElectrical panel HumidifierAir filter Clogged filter alarmCooling coil CondenserPan Emergency drainPage External Optional FeaturesEmergency EnvironmentalAPC NetworkAIR AFX Series Optional Features System Components ReheatPage Performance Specifications Net cooling capacity-air/remote condensingModel Capacity in BTU/H 26T 28T Net cooling capacity-waterNet cooling capacity-glycol Page Pump system Performance DataAir system Coolant requirementsCompressor-scroll Water regulating valve-2-Way/3-Way, single seatedHumidification-solid state electrode canister FiltersSteam reheat Electric ReheatHot gas reheat Hot water reheatConnection sizes Voltage Electrical DataElectric Reheat-6-14 ton HumidifierElectric Reheat-18-28 ton Steam/hot water/or no-reheat-6-14 ton Steam/hot water/or no-reheat-18-28 ton Indoor centrifugal condenser units Page Guide Specifications GeneralProduct APC NetworkAIR AFX Series Guide Specifications APC NetworkAIR AFX Series Guide Specifications APC NetworkAIR AFX Series Guide Specifications GPML/s at ft m external head, and operate on Ph, 60-Hz power Options Visual and audible alarmAPC NetworkAIR AFX Series Guide Specifications Page Downflow-6-8 ton Dimensional DataDownflow-10-18 ton Downflow-20-28 ton Upflow front-return-6-8 ton Upflow front-return-10-18 ton Upflow front-return-20-28 ton Upflow rear-return-6-8 ton Upflow rear-return-10-18 ton Upflow rear-return-20-28 ton Indoor rear-discharge centrifugal condenser-6-8 ton Indoor rear-discharge centrifugal condenser-10-18 ton Indoor rear-discharge centrifugal condenser-20-28 ton Indoor top-discharge centrifugal condenser-6-8 ton Indoor top-discharge centrifugal condenser-10-18 ton Indoor top-discharge centrifugal condenser-20-28 ton Page Key to the model number Air-Cooled Condensers and DrycoolersLbs Air-cooled condenser-physical dataAir-cooled condenser-electrical data Model TempFLA MCA MOP Single-fan air-cooled condenser-6 ton Dual-fan air-cooled condenser-6-14 ton Triple-fan air-cooled condenser-14-20 ton Dual-fan air-cooled condenser-20-26 ton Triple-fan air-cooled condenser-26-28 ton Tonnage Ambient FLA MCA MOP DrycoolerGlycol cooled drycooler-physical data Glycol cooled drycooler-electrical dataDual-fan fluid cooler-6-8 ton Triple-fan fluid cooler-10-12 ton Dual-fan fluid cooler-14-18 ton Triple-fan fluid cooler-20-28 ton Page Pump Specifications Pump electrical dataFLA MCA Page Unit location Guidelines for InstallationService access Room preparationUtility connections Power unitRigging FloorstandWater supply Page APC Worldwide Customer Support

AFX Series specifications

The American Power Conversion (APC) AFX Series is a groundbreaking line of uninterruptible power supplies (UPS) designed to meet the demands of modern businesses. APC, a subsidiary of Schneider Electric, is known for its reliable power management solutions that ensure the availability of critical equipment. The AFX Series stands out for its advanced features, cutting-edge technologies, and robust characteristics that cater to a diverse range of applications.

One of the standout features of the AFX Series is its flexible architecture. The series offers modular scalability, allowing users to expand power capacity as needed. This modular design is particularly beneficial for growing businesses that require a power solution that can adapt to changing demands without the need for a complete replacement. The AFX units boast a compact footprint, making them suitable for deployment in server rooms, data centers, or environments with space constraints.

Another significant characteristic of the AFX Series is its high efficiency. The UPS units are designed to operate at a remarkable efficiency level, often exceeding 95%, which translates into reduced energy consumption and lower operating costs. This efficiency not only benefits the environment but also enhances the overall reliability of power delivery.

In terms of technology, the AFX Series leverages advanced lithium-ion battery technology. Lithium-ion batteries have a longer lifespan and faster charge times compared to traditional lead-acid batteries. This innovation ensures that uptime is maximized, while maintenance efforts are minimized, allowing IT personnel to focus on more critical tasks.

The AFX Series is also equipped with intelligent monitoring and management features. Users can take advantage of real-time data and analytics through an intuitive web interface, providing insights into power performance and battery health. This capability aids in proactive maintenance, ensuring potential issues are addressed before they lead to downtime.

Furthermore, the AFX Series supports a range of connectivity options, including SNMP, USB, and serial interfaces. These options enable seamless integration into existing management systems, allowing for centralized monitoring and control.

In summary, the American Power Conversion AFX Series is a powerful solution for organizations seeking reliability, efficiency, and scalability in their UPS systems. With its modular architecture, high operational efficiency, advanced lithium-ion technology, and user-friendly management capabilities, the AFX Series is an exemplary choice for businesses aiming to safeguard their critical infrastructure against power interruptions.
Top Page Image Contents