Kidde PI2000CA manual Image 5 Attaching the AC QUICK-CONNECT Wire Harness

Installation

•Pull the AC Quick-Connect wire harness through the center hole in the mounting bracket and secure the bracket, making sure that the mounting screws are positioned in the small ends of the keyholes before tightening.

•Plug the AC Quick-Connect wire harness into the back of the alarm (Image 5), making sure that the locks on the connector snap into place. Then push the excess wire back into the electrical box through the hole in the center of the mounting plate.

•Install the alarm on the mounting plate and rotate the alarm in the direction of the “ON” arrow on the cover until the alarm ratchets into place (Image 4D). This ratcheting function allows for aesthetic alignment. Note: The alarm will attach to the mounting plate in 4 positions (every 90°).

•Turn on the AC power. The green AC Power On indicator should be lit when the alarm is operating from AC power.

IMAGE 5 ATTACHING THE AC QUICK-CONNECT WIRE HARNESS

11