![](/images/new-backgrounds/1053620/536205x1.webp)
Installation
This unit is suitable as a single station and/or multiple station alarm (interconnects with up to 24 devices), and has a
IMPORTANT:This unit is only approved to interconnect with the Kidde line of products. It is not approved to interconnect with any other manufacturer’s products.
This alarm is interconnect compatible with the following alarms and accessories:
Smoke alarms: | 1235CA, 1275CA, 1276CA, 1285CA, |
| i12020CA, i12040CA, i12060CA, |
| PE120CA, PI2000CA |
Smoke/CO alarms: | |
CO alarms: | |
Relay modules: | 120X, SM120X, CO120X |
Heat alarm: | HD135FCA |
Strobe Light: | SL177I |
Refer to respective manuals for specific application information.
This product is designed to detect products of combustion using both an ionization sensor and a photoelectric sensor. The ionization sensor contains 0.9 microcurie of Americium 241, a radioactive material. Distributed under U.S. NRC License No.
ELECTRICAL RATING: 120 V AC, 60 HZ, 80 mA maximum per alarm (maximum 80 mA for originating unit with 24 devices interconnected).
WARNING! Battery door will not close unless battery is present. Removal of the smoke alarm battery and disconnecting or loss of A.C power will render the smoke alarm inoperative.
IMPORTANT! Read all instructions before installation and keep this manual near the alarm for future reference.
2