Honeywell manual IPGSM-DP Trouble Detection Information, Dialer Capture Module Information

Page 10

IPGSM-DP Commercial Fire Communicator – Installation and Setup Guide

IPGSM-DP Trouble Detection Information

Telco 1 is used for the Fire Panel to output contact ID messages to the IPGSM-DP, and Telco 2 is used by the IPGSM-DP to report faults to the Fire Panel. If Telco 1 is not operational, the Fire Panel will use Telco 2 to report events if there are no faults in the iGSM Communications module.

Fault Condition

Indication to Fire Panel

PowerBoost1 fault

Telco 2 is cut.

iGSM Communications Module fault

 

Failure of one of the two

Telco 2 is cut.

communications paths.

 

Failure of both communications

Telco 1 and 2 are cut.

paths.

 

Dialer Capture Module buffer is full.

Hang up. (Panel will retry, giving the buffer a chance to empty.)

 

 

Dialer Capture Module Information

LED Indicator

STATUS

 

 

RED – Steady ON

Messages exist in buffer.

 

 

RED – Flashing

No messages to be sent. Waiting for messages.

 

 

GREEN – Steady ON

Normal Indication.

 

 

GREEN – Blinks every 2 sec.

PowerBoost1 communication problem.

 

 

GREEN – Blinks twice every sec.

Communication Module connection is lost.

 

 

GREEN – Blinks 10 times every sec.

PowerBoost1 and Communications Module connection is lost.

 

 

EOL

Telco 2 Telco 1 EOL

ZN-

ECP

Ring 2

Tip 2

ZN+ PWR GND Tip 1 Ring 1

Data Out Data In 12V In GND

 

 

 

 

 

 

 

 

 

RED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GREEN

Dialer Capture Module

iPGSM-COM-004-V0

Note: Telco ports 1 (primary dialer) and 2 (secondary dialer) may be used instead of the terminal board.

Whichever connection method is used, both Telco paths must be connected to the Fire Panel.

LED Display Information

Panel Status

LED Indicator

 

 

RADIO TROUBLE

Yellow – ON when radio trouble is present.

 

 

 

Buzzer – Upon loss of AC power, this will

 

beep once every 10 seconds.

 

 

LOW BATTERY

Yellow – ON when battery is low.

 

 

 

Yellow – (not used)

 

 

AC LOSS

Yellow – ON when no AC is present.

 

 

AC ON

Green – ON when AC is present.

 

 

Buzzer

iPGSM-COM-006-V0

8

Image 10
Contents IPGSM-DP Contents General Information InstallationOperation Activate the SIM and Setup the Customer Account Register the Communications Module with AlarmNetDetermine the Signal Strength and Select a Location Mount and WirePowerBoost1 Transformer N8167 ConduitProgram the Communications Module 7720P ProgrammerConfigure the Fire Panel Test the SystemDialer Capture Module Information IPGSM-DP Trouble Detection InformationLED Display Information PowerBoost1 Module Information ActiveIGSM Communications Module Information OFF Normal Slow Blink Loss of communication withIPGSM-DP Specifications RF SpecificationsPage Wiring Diagram + BatteryÊ800-08074AŠ

IPGSM-DP specifications

The Honeywell IPGSM-DP is an advanced communication device specifically designed for alarm signaling and monitoring in contemporary security systems. This state-of-the-art unit is engineered to enhance the efficiency and reliability of alarm communications, serving as an integral part of home and business security solutions.

One of the main features of the IPGSM-DP is its dual-path communication capability, allowing it to connect via both cellular networks and the internet. This dual communication method ensures that security signals are transmitted even in situations where traditional phone lines may fail or be compromised. This capability is particularly crucial in maintaining a reliable line of communication between alarm systems and monitoring stations.

In terms of technology, the IPGSM-DP utilizes a robust GSM (Global System for Mobile Communications) module for cellular communication. This technology provides high-speed data transmission, which is essential for sending real-time alerts and notifications to security personnel or end-users. This feature enhances the overall responsiveness of the alarm system, enabling swift action in the event of a security breach.

Moreover, the IPGSM-DP is compatible with various alarm control panels, making it a versatile addition to existing security setups. It seamlessly integrates with both Honeywell and third-party systems, allowing users to upgrade their alarm capabilities without overhauling their entire security infrastructure.

The device also boasts advanced encryption technology, which serves to protect the integrity of the communication channels. This security feature is vital in safeguarding sensitive information and ensuring that alarm signals cannot be intercepted or tampered with.

In terms of characteristics, the IPGSM-DP is designed with user-friendliness in mind. It comes with an intuitive LED indicator that provides visual feedback on operational status, signal strength, and any potential issues that may arise. The compact design allows for easy installation in various locations within a property, minimizing disruption to the environment.

Furthermore, the Honeywell IPGSM-DP supports multiple protocols, including Contact ID and SIA, thereby ensuring compatibility with a wide range of monitoring stations and allowing for flexible deployment in diverse security scenarios. Enhanced diagnostic capabilities further simplify troubleshooting and maintenance of the device, ensuring long-term reliability.

In summary, the Honeywell IPGSM-DP is a cutting-edge communication device offering dual-path communication, GSM technology, compatibility with multiple alarm systems, and advanced security features. Its distinctive characteristics make it an excellent choice for enhancing the efficiency and reliability of alarm monitoring and signaling in various security applications.