BRK electronic Mx-1000 manual Engineer’s Zone/Output Configuration Time-out Warning

Page 29

15.4Engineer’s Zone/Output Configuration Time-out Warning:

This feature is provided to prevent the panel being left in the Zone/Output Configuration condition.

●1 minute after the last button press:

○The panel buzzer will restart.

○The Select LED will flash.

○The System Fault LED will continue flashing.

●Press the Select On/Off button to continue with the configuration process otherwise quit the configuration process as described in 15.2.4 above

15.5Invalid Configuration conditions:

●Invalid condition: If 2 or more configuration switches on the motherboard are in the ON position at the same time:

○The Config LED on the motherboard will flash.

○The System Fault and Select LEDs on the display will flash.

○The fault relay will operate.

○The panel buzzer will sound.

○The Cursor indication will clear.

○Configuration will be inhibited.

●To clear the invalid condition check the zone and output config switches [1/4, 1/5, 1/6, 1/7, 1/8] on the motherboard and ensure that only one is selected to ON.

●Invalid condition: Selecting any config mode switch [1/4, 1/5, 1/6, 1/7, 1/8] to the ON position whilst the panel is in the fire condition.

○The Config LED on the motherboard will flash.

○The System Fault and Select LEDs on the display will flash.

○The panel buzzer will sound.

○The Cursor indication will clear.

○Configuration will be inhibited.

●To clear the invalid condition, select the config switch to OFF. Reset the fire alarm condition before attempting the configuration process again.

15.6List of configuration DIL switches and their functions

●SW 1/1 - Inhibit F/P on NLZ:

Selects Fire Protection relay to operate or not to operate for a fire condition on any zone configured to non-latched mode.

○OFF Fire Protection relay operates for a fire condition on any zone configured to non- latched mode.

○ON: Fire Protection relay does not operate for a fire condition on any zone configured to non-latched mode.

○[Not EN54 compliant function].

●S/W 1/2 - Delay Alarm Sil & Rst:

○OFF: Silence and reset available as normal.

○ON: Prevents alarms being silenced or reset for a period of 3 minutes after a fire alarm condition occurs.

○[Not EN54 compliant function].

Page 29 of 40

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Technical Data Sheet List Of Contents List of Tables List Of FiguresIntroduction Overview of Installation and CommissioningInstall all field wiring and equipment Mx-1002 / Mx-1004 Internal View Internal Panel ViewsMx-1032 Internal View Page Typical Wiring Diagram Mx-1016 16 -Zone Typical Wiring Schematic16 Zone Expansion Board Termination Details Circuit Connection Details2-16 Zone Motherboard Termination Details C1627 Motherboard Layout Mx-1000 Series C1627 Motherboard FeaturesVisual indications 10 Mx-1000 Series C1632 16-Zone Expansion Board FeaturesPower Supplies 11.3 32-Zone Power Supply Features And Connections Battery DisconnectElectrical Safety InstallationElectrical Safety Quantity Description Type Installation Instructions12.2.1 Mx-1000 Series Panel Installation Instructions Page Installation And Connection Of The C1631 Repeater Interface Repeater Connection Diagram An Overview Of The Commissioning Procedure Commissioning ChecklistCommissioning IntroductionPre-Commissioning Wiring Check Commissioning Procedure Powering upConfiguration Commissioning zones Commissioning the Class Change Input Commissioning the Fire and Fault Routing OutputsCommissioning the Fire Protection control signal Commissioning repeaters Commissioning ancillary inputsCommissioning ancillary outputs User Indications showing optional clock module User Controls and IndicationsUser Controls showing optional clock module Switch Functionality Button Availability DescriptionOperating the Engineer’s functions Engineer’s Zone/Output Configuration ProcessZone or Output Configuration Page List of configuration DIL switches and their functions Engineer’s Zone/Output Configuration Time-out WarningInvalid Configuration conditions Page Delay 2/2 2/3 2/4 2/5 Duration Delay Switch SettingsC1631 setting for repeater addresses C1631 setting for quantity of repeatersRepeater Quantity Repeater AddressEnable/disable earth fault monitoring Optional Clock Module Configuration and SettingStandard Module Engineer Mode To Zero the Alarm CounterHhmmss Time Set MM flashing Hhmmss OFF Time MM flashing C1651 Clock Module DIL switch 1 and Link 1 Settings Configuring the Clock ModuleLink DIL Switch Pole Position Selected Function Link Position Selected FunctionClock Module Error Messages 16.3 C1651 Clock Module PCB FeaturesWP DIL Switch Error Message Eeprom Error MessageROM Checksum Error message Eeprom 0 Error Eeprom 1 ErrorMechanical Mx-1000 Series Panel Repeater Specification Zone Mechanical, Electrical & Environmental SpecificationPowersonic Battery Mx-1000 Series Panel Repeater Specification Zone

Mx-1000 specifications

The BRK electronic Mx-1000 is an innovative and versatile device designed for both home and industrial use, primarily focusing on smoke and carbon monoxide detection. Its advanced features enhance safety, ensuring peace of mind for users in various environments.

One of the standout features of the Mx-1000 is its dual-sensor technology. It combines both photoelectric and ionization sensors, maximizing its ability to detect different types of smoke. Photoelectric sensors are highly effective at identifying smoldering fires, which are often associated with slow-burning materials. On the other hand, ionization sensors excel at detecting fast-flaming fires. This dual capability ensures comprehensive fire detection, making the Mx-1000 one of the most reliable devices in its category.

Another notable characteristic is its built-in carbon monoxide detector. Carbon monoxide is a silent killer, and the Mx-1000 addresses this threat by providing early warning signals when harmful levels of this gas are detected. The integration of both smoke and carbon monoxide detection in a single unit simplifies safety measures and reduces the number of devices required for home and workplace safety.

The Mx-1000 is equipped with advanced digital technology that enhances its functionality. A state-of-the-art microprocessor evaluates alarm conditions more intelligently, which minimizes the chances of false alarms. This feature is particularly beneficial for households that might experience frequent smoke triggers from cooking or other benign sources.

User-friendliness is a key design aspect of the Mx-1000. It features a clear LED display that indicates the operational status, and a simple test button allows users to verify functionality with ease. The device also features a low-battery indicator, ensuring users are always informed about its operational state.

Installation is straightforward, with options for both wall and ceiling mounting to accommodate various room layouts. The Mx-1000 is designed to appeal to a wide range of customers, from DIY enthusiasts to professional installers.

In addition to its technological advancements, the BRK electronic Mx-1000 is built with reliability in mind. Its durable construction is meant to endure various conditions, ensuring longevity and consistent performance over time. This combination of top-tier technology, user-friendly features, and robust design makes the Mx-1000 a trusted choice for those seeking comprehensive safety solutions in smoke and carbon monoxide detection.
Top Page Image Contents