Hearth and Home Technologies CB4236IR, CB4842IR Congratulations, Homeowner Reference Information

Page 2

Read this manual before installing or operating this appliance.

Please retain this owner’s manual for future reference.

A. Congratulations

Congratulations on selecting a Heatilator gas fireplace, an elegant and clean alternative to wood burning fire- places. The Heatilator gas fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency.

As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference. We suggest that you keep it with your other important documents and product manuals.

The information contained in this owner’s manual, unless noted otherwise, applies to all models and gas control systems.

Your new Heatilator gas fireplace will give you years of durable use and trouble-free enjoyment. Welcome to the Heatilator family of fireplace products!

Homeowner Reference Information

We recommend that you record the following pertinent information about your fireplace.

Model Name: ___________________________________________ Date purchased/installed:__________________

Serial Number:__________________________________________ Location on fireplace: _____________________

Dealership purchased from: _______________________________ Dealer Phone: __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

Listing Label Information/Location The model information regarding your specific fireplace can be found on the rating plate usually located in the control area of the fireplace.

 

 

 

Gas Type

Serial #

 

Hearth & Home Technologies Inc

SERIAL

 

 

 

XXXXXXXXX

 

1915 W. Saunders Street

NO. DE SÉRIE

Model #

Mt. Pleasant, IA 52641

ANSI Standard

 

 

 

 

 

 

 

 

 

 

MODEL

XXXXXX

MFG. DATE

 

 

 

MODÈLE

DATE DE FAB.

 

 

 

 

 

 

 

GAS TYPE/TYPE DE GAZ

NATURAL/NATUREL

PROPANE

 

ALTITUDE

 

0-2000 2000-4000 FT/PI

0-2000 2000-4000 FT/PI

 

MAX INPUT/DÉBIT

XX,XXX XX,XXX BTUH

XX,XXX XX,XXX BTUH

 

MIN INPUT/DÉBIT

XX,XXX XX,XXX BTUH

XX,XXX XX,XXX BTUH

 

MANIFOLD PRESSURE/PRESSION TUBULAIRE

 

 

 

MAX.

 

XX IN. W.C./C. D'EAU

XX IN. W.C./C. D'EAU

 

MIN.

 

XX IN. W.C./C. D'EAU

XX IN. W.C./C. D'EAU

 

MIN. INLET PRESS.

XX IN. W.C./C. D'EAU

1XX IN. W.C./C. D'EAU

 

FOR THE PURPOSE OF INPUT ADJUSTMENT

 

 

 

PRESS. MIN. D'ALIMENTATION

 

 

 

 

ORIFICE SIZE

 

 

 

 

 

DIAM. DE L'INJECTEUR

XX/XX DIA. in./mm

XX/XX DIA. in./mm

LESS THAN/MOINS DE 3 AMPÈRES., 115V., 60 Hz

DO NOT REMOVE OR COVER THIS LABEL.

VENTED GAS FIREPLACE - NOT FOR USE WITH SOLID FUEL.

FOYER À GAZ À ÉVACUATION - NE DOIT PAS ÊTRE UTILISÉ

AVEC UN COMBUSTIBLE SOLIDE.

XXXX

CERTIFIED

FOR CANADA

CERTIFIÉ POUR LE

CANADA

Orifice

Size

2

Heatilator • Caliber BV Series • 4040-262 Rev J • 10/08

Image 2
Contents Hot glass will cause burns Models CB4236IR CB4842IR Vent Gas ApplianceWhat to do if you smell gas Congratulations Homeowner Reference InformationUser Guide Table of ContentsInstaller Guide Troubleshooting Warranty Hearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of LiabilityWarranty Listing and Code Approvals Your Fireplace Gas Fireplace SafetyOperating Instructions Fan Kit optional Fixed Glass AssemblyRemote Controls, Wall Controls and Wall Switches Clear SpaceFor Your Safety Read Before Lighting Lighting Instructions IPIFrequently Asked Questions After Fireplace is LitMaintenance and Service Maintenance Tasks-HomeownerMaintenance Tasks-Qualified Service Technician Gasket Seal and Glass Assembly InspectionGetting Started Typical Appliance SystemInspect Appliance and Components Design and Installation ConsiderationsTools and Supplies Needed Any such action may cause a fire hazardNegative Pressure Constructing the Appliance Chase Framing and ClearancesSelecting Appliance Location Model #Clearances Rough Opening Model Width Height DepthMantel and Wall Projections MantelsWood or Fuel Oil Termination Termination LocationsVent Termination Minimum Clearances Vent System Configuration Vent Information and DiagramsVent Guidelines Wall and Ceiling Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Vertical Penetration FramingAppliance Preparation Gas and Electrical ConnectionsInstall Attic Insulation Shield Installing Vent PipeAssembly of Vent Sections Secure Vent SectionsGas Pressure Gas InformationFuel Conversion Gas ConnectionElectrical Information Wiring RequirementsOptional Accessories Requirements Junction Box Installation Wall Switch Installation for Fan OptionalFinishing Facing MaterialAppliance Setup Firescreen Install the Log AssemblyGlass Assembly Hood Install Louvers and TrimAir Shutter Setting Intellifire Ignition System TroubleshootingSymptom Possible Cause Corrective Action Range. Replace pilot if any damage is detected Appliance Dimension Diagram Reference MaterialsService Parts List CB4236IRCB4842IR IPI Valve Assembly Optional Components Model # Description Contact Information

CB4842IR, CB4236IR specifications

Hearth and Home Technologies introduces the CB4842IR and CB4236IR, two premium fireplace options designed to enhance the ambiance and warmth of any space. Both models combine modern technology with elegant design, making them ideal choices for contemporary homes.

The CB4842IR features a large viewing area, measuring 48 inches wide, which provides an impressive visual display of the flames. Its contemporary design allows for a seamless integration into various interior styles, from rustic to minimalist. On the other hand, the CB4236IR, with its 42-inch width, offers a slightly more compact option, perfectly suited for smaller spaces without sacrificing style or warmth.

Both models utilize advanced infrared technology, which provides efficient heat distribution while maintaining a comfortable and inviting atmosphere. This technology ensures that the warmth is evenly radiated throughout the room, creating a cozy environment even in larger areas. Additionally, the infrared heat is effective in penetrating objects and surfaces, resulting in a feeling of warmth that is deeply satisfying.

A standout feature of these fireplaces is the customizable flame settings that allow users to adjust the ambiance to their preference. With multiple flame color options, users can choose from traditional yellow flames to vibrant blue hues, adding a personal touch to the fireplace experience. This feature is particularly useful for setting the mood during different occasions, whether it's a romantic dinner or a lively gathering with friends.

Both the CB4842IR and CB4236IR come equipped with user-friendly controls, enabling easy operation from anywhere in the room. Additionally, they offer programmable thermostats for precise temperature control, further enhancing user convenience and energy efficiency.

Safety features are paramount with Hearth and Home Technologies, and both models include built-in safety mechanisms such as automatic shutoff functions. This ensures peace of mind, whether you're at home or away. Furthermore, the fireplaces are designed for easy maintenance, with features that simplify cleaning and upkeep.

In conclusion, the Hearth and Home Technologies CB4842IR and CB4236IR fireplaces combine aesthetic appeal with advanced heating technology. With customizable flame settings, user-friendly controls, and robust safety features, these models stand out as premium options for anyone looking to enhance their living space with a touch of elegance and warmth. Whether for functionality or style, these fireplaces cater to the needs of modern homeowners, blending seamlessly into any décor.