Hearth and Home Technologies CB4842IR Appliance Preparation, Gas and Electrical Connections

Page 23

9 Appliance Preparation

A. Install Outside Air Kit Damper Assembly

CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during installa- tion. Sheet metal edges are sharp.

C. Secure and Level the Appliance

WARNING! Risk of Fire! Prevent contact with:

•Sagging or loose insulation

•Insulation backing or plastic

WARNING! Risk of Fire/Asphyxiation. DO NOT draw out-

• Framing and other combustible materials

side combustion air from:

 

Block openings into the chase to prevent entry of blown-in

 

 

 

 

• Wall, floor or ceiling cavity.

insulation. Make sure insulation and other materials are

• Enclosed space such as an attic or garage.

secured.

• Close proximity to exhaust vents or chimneys.

DO NOT notch the framing around the appliance

Fumes or odor may result.

 

 

standoffs.

• The outside air kit can only be installed on the left side

Failure to maintain air space clearance may cause

of the appliance.

 

 

overheating and fire.

• Refer to the installation instructions provided with the

 

kit.

 

 

 

The diagram shows how to properly position, level, and

 

 

 

 

secure the appliance (see Figure 9.2). Nailing tabs are

 

 

 

 

provided to secure the appliance to the framing members.

 

 

 

 

 

 

 

 

• Bend out nailing tabs on each side.

 

 

 

 

• Place the appliance into position.

 

Flexible Duct

 

• Keep nailing tabs flush with the framing.

 

(not supplied)

 

• Level the appliance from side to side and front to

 

 

 

 

back.

 

 

 

 

• Shim the appliance as necessary. It is acceptable to use

 

 

 

 

wood shims underneath the appliance.

 

 

 

Outside Air

• Secure the appliance to the framing by using nails or

 

 

 

screws through the nailing tabs.

Outside Air

 

 

Plate

 

 

Assembly

• Secure the appliance to the floor by inserting two screws

Hood

2 Wire Ties

 

 

 

 

through the bottom front of the appliance.

• Hearth & Home Technologies Inc recommends using

 

 

 

 

 

UL181 Class 0 or Class I rigid or flexible ducting.

 

 

 

 

 

• Secure flex duct with metal tape, screws or wire ties.

 

 

 

 

 

Figure 9.1 Outside Air Kit Installation

 

 

 

 

 

B. Gas and Electrical Connections

 

 

 

 

 

If applicable, ensure that gas and electrical connections

 

 

 

 

are installed at this time. Refer to Sections 11 (Gas Infor-

 

Nailing Tabs

 

 

mation) and 12 (Electrical Information).

 

 

 

 

 

 

 

(both sides)

 

 

 

 

 

Figure 9.2 Proper Positioning and Securing of Appliance

 

Heatilator

• Caliber BV Series

•

4040-262 Rev J •

10/08

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Hot glass will cause burns Models CB4236IR CB4842IR Vent Gas ApplianceWhat to do if you smell gas Homeowner Reference Information CongratulationsUser Guide Table of ContentsInstaller Guide Troubleshooting CONDITIONS, Exclusions & Limitation of Liability Warranty Hearth & Home Technologies Limited WarrantyWarranty Listing and Code Approvals Your Fireplace Gas Fireplace SafetyOperating Instructions Clear Space Fixed Glass AssemblyRemote Controls, Wall Controls and Wall Switches Fan Kit optionalLighting Instructions IPI For Your Safety Read Before LightingAfter Fireplace is Lit Frequently Asked QuestionsMaintenance Tasks-Homeowner Maintenance and ServiceGasket Seal and Glass Assembly Inspection Maintenance Tasks-Qualified Service TechnicianTypical Appliance System Getting StartedAny such action may cause a fire hazard Design and Installation ConsiderationsTools and Supplies Needed Inspect Appliance and ComponentsNegative Pressure Model # Framing and ClearancesSelecting Appliance Location Constructing the Appliance ChaseRough Opening Model Width Height Depth ClearancesMantels Mantel and Wall ProjectionsWood or Fuel Oil Termination Termination LocationsVent Termination Minimum Clearances Vent System Configuration Vent Information and DiagramsVent Guidelines Vertical Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Wall and Ceiling Penetration FramingGas and Electrical Connections Appliance PreparationSecure Vent Sections Installing Vent PipeAssembly of Vent Sections Install Attic Insulation ShieldGas Connection Gas InformationFuel Conversion Gas PressureElectrical Information Wiring RequirementsOptional Accessories Requirements Wall Switch Installation for Fan Optional Junction Box InstallationFacing Material FinishingAppliance Setup Firescreen Install the Log AssemblyGlass Assembly Hood Install Louvers and TrimAir Shutter Setting Intellifire Ignition System TroubleshootingSymptom Possible Cause Corrective Action Range. Replace pilot if any damage is detected Reference Materials Appliance Dimension DiagramCB4236IR Service Parts ListCB4842IR IPI Valve Assembly Optional Components Model # Description Contact Information

CB4842IR, CB4236IR specifications

Hearth and Home Technologies introduces the CB4842IR and CB4236IR, two premium fireplace options designed to enhance the ambiance and warmth of any space. Both models combine modern technology with elegant design, making them ideal choices for contemporary homes.

The CB4842IR features a large viewing area, measuring 48 inches wide, which provides an impressive visual display of the flames. Its contemporary design allows for a seamless integration into various interior styles, from rustic to minimalist. On the other hand, the CB4236IR, with its 42-inch width, offers a slightly more compact option, perfectly suited for smaller spaces without sacrificing style or warmth.

Both models utilize advanced infrared technology, which provides efficient heat distribution while maintaining a comfortable and inviting atmosphere. This technology ensures that the warmth is evenly radiated throughout the room, creating a cozy environment even in larger areas. Additionally, the infrared heat is effective in penetrating objects and surfaces, resulting in a feeling of warmth that is deeply satisfying.

A standout feature of these fireplaces is the customizable flame settings that allow users to adjust the ambiance to their preference. With multiple flame color options, users can choose from traditional yellow flames to vibrant blue hues, adding a personal touch to the fireplace experience. This feature is particularly useful for setting the mood during different occasions, whether it's a romantic dinner or a lively gathering with friends.

Both the CB4842IR and CB4236IR come equipped with user-friendly controls, enabling easy operation from anywhere in the room. Additionally, they offer programmable thermostats for precise temperature control, further enhancing user convenience and energy efficiency.

Safety features are paramount with Hearth and Home Technologies, and both models include built-in safety mechanisms such as automatic shutoff functions. This ensures peace of mind, whether you're at home or away. Furthermore, the fireplaces are designed for easy maintenance, with features that simplify cleaning and upkeep.

In conclusion, the Hearth and Home Technologies CB4842IR and CB4236IR fireplaces combine aesthetic appeal with advanced heating technology. With customizable flame settings, user-friendly controls, and robust safety features, these models stand out as premium options for anyone looking to enhance their living space with a touch of elegance and warmth. Whether for functionality or style, these fireplaces cater to the needs of modern homeowners, blending seamlessly into any décor.
Top Page Image Contents