Hearth and Home Technologies CB4236IR Install the Log Assembly, Firescreen, Glass Assembly

Page 30

H. Install the Log Assembly

•Base logs have been permanently mounted on the grate assembly and should not be moved. See Figure 14.5.

Figure 14.5 Base Logs

•Install “Y” log on left hand side of grate using locating pins to position. See Figure 14.6.

Figure 14.6 Placing Left Top Log

•Install right top log as shown in Figure 14.7 using locating pins to position log properly.

Figure 14.7 Placing Right Top Log

I. Firescreen

The firescreen is a protective barrier and must be at- tached.

Removing Firescreen

•Open lower access panel and pull base of screen towards you.

•The top of the screen will slide out of the screen retainers at the top of the firebox opening.

Replacing Firescreen

•Remove top grille assembly by lifting upwards and pulling towards you.

•Slide top of screen panel into top screen brackets and rotate bottom of screen to lower door latches.

•Close lower access panel and reinstall top grille.

J. Glass Assembly

WARNING! Risk of Asphyxiation! Handle fixed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.

•DO NOT strike, slam or scratch glass.

•DO NOT operate fireplace with glass removed, cracked, broken or scratched.

•Replace as a complete assembly.

Removing Glass Assembly

•Remove firescreen.

•Pull the four (CB4236I) or six (CB4842I) glass assembly latches out of the groove on the glass frame.

•Remove the glass panel from the appliance.

Replacing Glass Assembly

•Set the glass panel on the lower two or three glass assembly latches, ensuring the glass panel is centered in the opening.

•Pull out and latch the four/six glass assembly latches into the groove on the glass frame.

•Replace firescreen.

Latches

(both bottom

and top)

Glass

Assembly

Figure 14.8 Fixed Glass Assembly

30

Heatilator • Caliber BV Series • 4040-262 Rev J • 10/08

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Models CB4236IR CB4842IR Vent Gas Appliance What to do if you smell gasHot glass will cause burns Congratulations Homeowner Reference InformationTable of Contents Installer GuideUser Guide Troubleshooting Warranty Hearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of LiabilityWarranty Listing and Code Approvals Gas Fireplace Safety Operating InstructionsYour Fireplace Fan Kit optional Fixed Glass AssemblyRemote Controls, Wall Controls and Wall Switches Clear SpaceFor Your Safety Read Before Lighting Lighting Instructions IPIFrequently Asked Questions After Fireplace is LitMaintenance and Service Maintenance Tasks-HomeownerMaintenance Tasks-Qualified Service Technician Gasket Seal and Glass Assembly InspectionGetting Started Typical Appliance SystemInspect Appliance and Components Design and Installation ConsiderationsTools and Supplies Needed Any such action may cause a fire hazardNegative Pressure Constructing the Appliance Chase Framing and ClearancesSelecting Appliance Location Model #Clearances Rough Opening Model Width Height DepthMantel and Wall Projections MantelsTermination Locations Vent Termination Minimum ClearancesWood or Fuel Oil Termination Vent Information and Diagrams Vent GuidelinesVent System Configuration Wall and Ceiling Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Vertical Penetration FramingAppliance Preparation Gas and Electrical ConnectionsInstall Attic Insulation Shield Installing Vent PipeAssembly of Vent Sections Secure Vent SectionsGas Pressure Gas InformationFuel Conversion Gas ConnectionWiring Requirements Optional Accessories RequirementsElectrical Information Junction Box Installation Wall Switch Installation for Fan OptionalFinishing Facing MaterialAppliance Setup Install the Log Assembly Glass AssemblyFirescreen Install Louvers and Trim Air Shutter SettingHood Troubleshooting Symptom Possible Cause Corrective ActionIntellifire Ignition System Range. Replace pilot if any damage is detected Appliance Dimension Diagram Reference MaterialsService Parts List CB4236IRCB4842IR IPI Valve Assembly Optional Components Model # Description Contact Information

CB4842IR, CB4236IR specifications

Hearth and Home Technologies introduces the CB4842IR and CB4236IR, two premium fireplace options designed to enhance the ambiance and warmth of any space. Both models combine modern technology with elegant design, making them ideal choices for contemporary homes.

The CB4842IR features a large viewing area, measuring 48 inches wide, which provides an impressive visual display of the flames. Its contemporary design allows for a seamless integration into various interior styles, from rustic to minimalist. On the other hand, the CB4236IR, with its 42-inch width, offers a slightly more compact option, perfectly suited for smaller spaces without sacrificing style or warmth.

Both models utilize advanced infrared technology, which provides efficient heat distribution while maintaining a comfortable and inviting atmosphere. This technology ensures that the warmth is evenly radiated throughout the room, creating a cozy environment even in larger areas. Additionally, the infrared heat is effective in penetrating objects and surfaces, resulting in a feeling of warmth that is deeply satisfying.

A standout feature of these fireplaces is the customizable flame settings that allow users to adjust the ambiance to their preference. With multiple flame color options, users can choose from traditional yellow flames to vibrant blue hues, adding a personal touch to the fireplace experience. This feature is particularly useful for setting the mood during different occasions, whether it's a romantic dinner or a lively gathering with friends.

Both the CB4842IR and CB4236IR come equipped with user-friendly controls, enabling easy operation from anywhere in the room. Additionally, they offer programmable thermostats for precise temperature control, further enhancing user convenience and energy efficiency.

Safety features are paramount with Hearth and Home Technologies, and both models include built-in safety mechanisms such as automatic shutoff functions. This ensures peace of mind, whether you're at home or away. Furthermore, the fireplaces are designed for easy maintenance, with features that simplify cleaning and upkeep.

In conclusion, the Hearth and Home Technologies CB4842IR and CB4236IR fireplaces combine aesthetic appeal with advanced heating technology. With customizable flame settings, user-friendly controls, and robust safety features, these models stand out as premium options for anyone looking to enhance their living space with a touch of elegance and warmth. Whether for functionality or style, these fireplaces cater to the needs of modern homeowners, blending seamlessly into any décor.
Top Page Image Contents