Hearth and Home Technologies QV32EV, QV32E, QV32E (120V) warranty Final Installation

Page 10

Hearth & Home Technologies - Colville

1445 North Highway, Colville, WA 99114-2124

H. FINAL INSTALLATION

Remove the protective cover to access the final installation items.

Remove the lava rock and white rock from the inside of the appliance.

1. Remove the Log Assembly

Logs are attached to the grate by two zip-ties. Carefully cut both ties by using a utility knife or side cutters. Discard ties and packaging material. Lift the log set straight up and place in a safe place.

2. Remove the Grate

Remove the two screws from the grate (one on each side), lift up the grate and set it aside.

3.Install the Side Refractory

a.Remove the refractory and fasteners from the carton.

b.Take the refractory support bracket and bend it until it is “L” shaped.

c.Install the bracket to the underside of the firebox top using the screws provided. Keep the bracket loose to allow the refractory to slide in behind it.

d.Tilt the side refractory into the appliance and slide it behind the bracket. See Figure 8.

e.Tighten the bracket when the refractory is resting on the hearth and is up against the back glass.

f.Repeat for the other side.

4.Reinstall the Grate

a.Put the grate back into the appliance, making sure the middle grate bar is sitting in the back bracket.

b.Replace the screws removed in Step 2.

5.Install the Hearth Refractory

a.Place the right hearth refractory into the appliance so the outer edge fits up against the side refractory. See Figure 9.

b.Loosen (if needed) the side refractory bracket to allow the hearth refractory to sit correctly (tight against the side of the firebox). The side refractory will rest upon the hearth refractory. See Figure 10.

c.Tighten the side refractory bracket.

d.Repeat for the other side.

Figure 8

Sliding the Side Refractory Behind the Bracket

(right side shown)

Figure 9 - Hearth Refractory Going In

(right side shown)

 

Figure 10 - Hearth Refractory In

 

 

(right side shown)

 

 

 

 

4030-240 Rev F

VILLAGE COLLECTION ELECTRIC FIREPLACE

 

09/03

 

10

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation & Operating Instructions Electric FireplacesContents Important InstructionsCanada Certification Appliance DimensionsListing Approvals Description Voltage Watts AmpsClearances Location and ClearancesAppliance Locations and Space Requirements Do not expose appliance to the elements such as rain, etcFraming Installation Non-Cabinet or Chase InstallationPower Supply Wiring WiringHardwired appliances only 110V/120V Wiring Diagram Combustible Finishing Material Finishing ChecklistFinishing Noncombustible Finishing MaterialFinal Installation Install the Andirons Place the White Rock Replace the Log AssemblyInstall the Door Front Place the Lava RockOperating Instructions Manual ControlsHand Held Remote Control Transmitter RCE-QUAD Optional Hand Held Remote Transmitter/Appliance InitializationFCC Requirements Remote Transmitter FunctionCleaning the Glass Doors & Back Glass Maintenance InstructionsCleaning the Firebox and Control Compartment Replacing the Light BulbsHeater System Maintenance 2019 Installing the HeaterTroubleshooting Issues Possible Causes SolutionsCabinets Optional ComponentsFront Faces Surrounds & TrimReplacement Parts Log Set Refractories QtyHome Owner’s Notes Symbols IndexWarranty How to Obtain Service

QV32E (120V), QV32EV, QV32E specifications

Hearth and Home Technologies has established a strong reputation for quality and innovation in the realm of home heating solutions. Their line of electric fireplaces, particularly the QV32EV, QV32E, and QV32E (120V), exemplifies this commitment by blending aesthetic appeal with advanced technology.

The QV32EV stands out due to its versatile design, allowing it to fit seamlessly into a variety of spaces, whether modern or traditional. With its 32-inch screen, it offers a striking focal point that captivates any room. The electric fireplace provides realistic, flame-like visuals, employing LED technology that creates an impressive ambiance without the need for wood or gas. Users can enjoy the warmth and glow of a fireplace without the associated hassle of traditional fuel sources, making it an ideal choice for those seeking convenience and functionality.

The QV32E model is similarly designed to deliver the same exceptional features but comes equipped with enhanced control options. It includes a remote control that allows users to adjust flame brightness, heat settings, and even set a timer, ensuring a customized experience. The model is also designed for easy installation, requiring minimal effort to mount on walls or integrate into existing spaces.

For the QV32E (120V), the convenience of using a standard electrical outlet opens the door for easy placement in any area without the complications of gas lines or venting systems. This model also prioritizes safety, featuring an automatic shut-off system that engages when the unit overheats, providing peace of mind for users.

Each model within this series boasts an adjustable heat output, enabling users to select the level of warmth that best suits their needs. The efficient heating technology not only enhances comfort but also lowers energy costs compared to traditional heating methods.

Additionally, the stylish design, coupled with a range of customizable options, allows consumers to select different logs and media to tailor the appearance of their fireplace according to personal style preferences.

In summary, Hearth and Home Technologies' electric fireplaces—QV32EV, QV32E, and QV32E (120V)—offer a perfect blend of aesthetics, functionality, and user-friendly features, making them an unparalleled choice for anyone looking to enhance their living space. Ideal for all types of interiors, these electric fireplaces represent a modern solution for home heating needs, providing both beauty and efficiency.
Top Page Image Contents