Hearth and Home Technologies QV32EV, QV32E, QV32E (120V) warranty Contents, Important Instructions

Page 2

 

 

Hearth & Home Technologies - Colville

 

 

1445 North Highway, Colville, WA 99114-2124

 

 

CONTENTS

A.

Listing Approvals

3

B.

Appliance Dimensions

3

C.

Location and Clearances

4

D.

Framing

5

E.

Installation

6

F.

Wiring

7

G.

Finishing

9

H.

Final Installation

10

I.

Operating Instructions

13

J.

Maintenance Instructions

16

K.

Troubleshooting

18

L.

Optional Components

19

M.

Replacement Parts

20

 

Index

23

 

Warranty

24

 

Note: An arrow () found in the text and in the index signifies change in content.

IMPORTANT INSTRUCTIONS!

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read all instructions before using this heater.

2.This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (.9m) from the front of the heater and keep them away from the sides and rear.

3.Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

4.Always unplug heater when not in use.

5.Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.

6.Do not use outdoors.

7.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.

8.Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over.

9.To disconnect heater, turn controls to off, then remove plug from outlet.

10.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

11.To prevent a possible fire, do not block air intakes or exhaust in any manner.

12.A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

13.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

14.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and rated not less than 1875 watts.

15.Always use properly grounded fused and polarized outlets.

16.Always use ground fault protection where required by electrical code.

17.Always disconnect power before performing any cleaning, maintenance or relocation of the appliance.

18.To prevent a possible fire, do not burn wood or other materials in this appliance.

19.To prevent personal injury, do not strike appliance glass.

20.To prevent electric shock or fire, always use a certified electrician should new circuits or outlets be required.

21.When transporting or storing the heater, keep in a dry place free from excessive vibration and store as to avoid damage.

22.SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

09/03

4030-240 Rev F

VILLAGE COLLECTION ELECTRIC FIREPLACE

2

Image 2
Contents Installation & Operating Instructions Electric FireplacesContents Important InstructionsCanada Certification Appliance DimensionsListing Approvals Description Voltage Watts AmpsClearances Location and ClearancesAppliance Locations and Space Requirements Do not expose appliance to the elements such as rain, etcFraming Installation Non-Cabinet or Chase InstallationHardwired appliances only WiringPower Supply Wiring 110V/120V Wiring Diagram Combustible Finishing Material Finishing ChecklistFinishing Noncombustible Finishing MaterialFinal Installation Install the Andirons Place the White Rock Replace the Log AssemblyInstall the Door Front Place the Lava RockOperating Instructions Manual ControlsHand Held Remote Control Transmitter RCE-QUAD Optional Hand Held Remote Transmitter/Appliance InitializationFCC Requirements Remote Transmitter FunctionCleaning the Glass Doors & Back Glass Maintenance InstructionsCleaning the Firebox and Control Compartment Replacing the Light BulbsHeater System Maintenance 2019 Installing the HeaterTroubleshooting Issues Possible Causes SolutionsCabinets Optional ComponentsFront Faces Surrounds & TrimReplacement Parts Log Set Refractories QtyHome Owner’s Notes Symbols IndexWarranty How to Obtain Service

QV32E (120V), QV32EV, QV32E specifications

Hearth and Home Technologies has established a strong reputation for quality and innovation in the realm of home heating solutions. Their line of electric fireplaces, particularly the QV32EV, QV32E, and QV32E (120V), exemplifies this commitment by blending aesthetic appeal with advanced technology.

The QV32EV stands out due to its versatile design, allowing it to fit seamlessly into a variety of spaces, whether modern or traditional. With its 32-inch screen, it offers a striking focal point that captivates any room. The electric fireplace provides realistic, flame-like visuals, employing LED technology that creates an impressive ambiance without the need for wood or gas. Users can enjoy the warmth and glow of a fireplace without the associated hassle of traditional fuel sources, making it an ideal choice for those seeking convenience and functionality.

The QV32E model is similarly designed to deliver the same exceptional features but comes equipped with enhanced control options. It includes a remote control that allows users to adjust flame brightness, heat settings, and even set a timer, ensuring a customized experience. The model is also designed for easy installation, requiring minimal effort to mount on walls or integrate into existing spaces.

For the QV32E (120V), the convenience of using a standard electrical outlet opens the door for easy placement in any area without the complications of gas lines or venting systems. This model also prioritizes safety, featuring an automatic shut-off system that engages when the unit overheats, providing peace of mind for users.

Each model within this series boasts an adjustable heat output, enabling users to select the level of warmth that best suits their needs. The efficient heating technology not only enhances comfort but also lowers energy costs compared to traditional heating methods.

Additionally, the stylish design, coupled with a range of customizable options, allows consumers to select different logs and media to tailor the appearance of their fireplace according to personal style preferences.

In summary, Hearth and Home Technologies' electric fireplaces—QV32EV, QV32E, and QV32E (120V)—offer a perfect blend of aesthetics, functionality, and user-friendly features, making them an unparalleled choice for anyone looking to enhance their living space. Ideal for all types of interiors, these electric fireplaces represent a modern solution for home heating needs, providing both beauty and efficiency.