Hearth & Home Technologies - Colville
1445 North Highway, Colville, WA
6.Install the Andirons
a.Bend the inner tabs of the andiron clips 90 degrees with a pair of pliers. See Figure 11.
b.Using the bent tab as an anchor, wrap the clip around the front grate bar so the open ends face out of the appliance. See Figure 12.
c.Slide the andiron into the clip. See Figure 13.
d.Repeat for the other side.
e.Position the andirons against the inner grate bar. See Figure 14.
Figure 11
Preparing the Andiron Clip
Figure 13
Andiron Installed
Figure 12 | Figure 14 |
Wrapping the Clip Around the Grate | Positioning the Andirons |
11 | VILLAGE COLLECTION ELECTRIC FIREPLACE |
09/03