Hearth and Home Technologies 2700-I warranty Advanced Combustion Technology ACT, Fire Risk

Page 1

R

2700-I ACT WOOD INSERT

Advanced Combustion Technology (ACT)

Model:

Tested and

O-T L

Portland

 

Listed by

Oregon USA

 

 

C

US

2700-I

OMNI-Test Laboratories, Inc.

NOTICE

DO NOT DISCARD THIS MANUAL

Important operating

Read, understand and

Leave this manual with

and maintenance

follow these instructions

party responsible for

instructions included.

for safe installation and

use and operation.

 

operation.

 

DO

 

DIS N

 

C O

AR

T

D

WARNING

If the information in these instructions is not followed exactly, a fire may result causing property damage, personal injury, or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Do not overfire - If heater or chimney connector glows, you are overfiring. Overfiring will void your warranty.

Comply with all minimum clearances to combustibles as specified. Failure to comply may cause house fire.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies recommends NFI certified professionals, or technicians supervised by an NFI certified professional.

WARNING

HOT SURFACES!

G l a s s a n d o t h e r surfaces are hot during operation AND cool down.

Hot glass will cause burns.

Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in the same room as appliance

Alert children and adults to hazards of high temperatures

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other combustibles away.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may overfire and generate poisonous gases (i.e. carbon monoxide).

1445 North Highway

 

www.quadrafire.com

Colville, WA 99114-2008

7007-161H September 1, 2008

Image 1
Contents Do not Discard this Manual Advanced Combustion Technology ACTHot glass will cause burns Fire RiskSerial Number Model Name 007Test Lab & Report No Manufactured DateTable of Contents Clearances to Combustibles DimensionsUnited States and Canada Maximum Mantel Depth 10 inches 254mmInstallation Installation recommendationsListings Chimney HEIGHT/DRAFT CONT’D Chimney HEIGHT/DRAFTCalculating Alternate Floor Protection Design, Installation & LocationMaterial Ovalizing Round Stainless Steel Liners Chimney RequirementsFirestopping Chimney to sheathingFire Risk Asphyxiation Risk Installing Outside Air Cover BoxMetal Heat Circulating masonry Masonry Fireplace Using DIRECT-CONNECT MethodFactory built zero clearance fireplace Usa installations onlyDoor Handle Assembly Installation in CanadaLeveling Legs Masonry and HEAT-CIRCULATINGOptional Quick Connect Collar Outside AIR InstallationPanel and Trim SET Panel & Trim Assembly InstructionsAttaching Panels and Trim to the Insert 13.1Blower Installation TOP Installation InstructionsFAN Speed Control ADJUSTMENT, if Necessary Shock RiskInjury Risk Gloves recommended May have sharp edges Zero Clearance Adjustable Trim SUPPORT, 2 inch to 10 inchOverfiring Operation Wood Selection and StorageBuilding a Fire Burn Rates Operating TipsOpacity ASH RemovalSTART-UP AIR System Air quality and your Quadra-Fire InsertPrimary AIR System Creosote Chimney Cleaning MaintenanceWhen cleaning glass Baffle Removal & Installation Brick replacement instructionsCeramic Blanket BaffleCeramic Blanket Exploded ViewDescription Alphabetical Order Part DescriptionDescription Part Description Alphabetical OrderItem # Item # Accessories in alphabetically order Part NumberAppliance Wood Insert, Advanced Combustible Technology ACT 2700-IDate of Service Performed By Description of Service Service And Maintenance LogCONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d Wood Insert ACT