GE RAK164P1, RAK148P1 Operation, Setting the Room Temperature Setpoint Temperature

Page 10

Operation.

The RAK148P1 and RAK164P1 thermostats have buttons that are used to:

•Adjust the setpoints of the thermostat

•Set the modes

•Program the schedule

Setting the Room Temperature (Setpoint Temperature)

1.With the Function switch at Cool or Heat, the current temperature setpoint displays.

2. Press the < or > setpoint displays.

button until the desired temperature

3.The new temperature setpoint is automatically saved in memory.

10

Image 10

Contents Installation Instructions ThermostatsImportant safety information SpecificationsIntroduction Overview Thermostat Control Installation Instructions Turn off power to the heating and cooling system Use supplied screws to mount thermostat base to wallWiring diagrams Terminals for six wires 2 heat/1 cool system RAK148P1 only Setup screens for Configuration Mode are as follows Configuration modeConfiguration Mode Settings Each screenAdjust to control the minimum Cool set temperature allowed Adjust to control the maximum Heat set temperature allowedSetting the Room Temperature Setpoint Temperature OperationStarting the thermostat Testing the thermostatAir conditioning should come on within a few seconds Heat should come on within a few seconds Heat TestFan Test Cool Operating functionsOff HeatSetting the time and day of the week Program Overview ProgrammingOff position Repeat Programming Heat temperature is displayed 60F to 85FPress the button and hold for Seconds. The days of the week Factory preprogramming Low battery warning, Cool mode Low battery indicatorLow battery warning, Off mode Low battery warning, Heat modeCombination failure, Cool mode Combination failure, Off modeCombination failure, Heat mode Troubleshooting tips Problem SolutionPage Page Page Thermostat Warranty For The Period GE Will Replace