GE RAK148P1, RAK164P1 installation instructions Operating functions, Off, Cool, Heat, Hold

Page 13

Operating functions.

Off

•In this mode, the thermostat will not turn on the heating or cooling devices (manual fan can operate).

•Off is also used to access Setup and Program modes.

Cool

AM

•In this mode, the thermostat controls the cooling system.

•Press the Mode button to enter and exit the Program Cool mode.

•In Program Cool mode (PROG displays), the thermostat will follow the program schedule that is stored in memory.

Heat

•In this mode, the thermostat controls the heating system.

•Press the Mode button to enter/exit the Program Heat mode.

•In Program Heat mode (PROG displays), the thermostat will follow the program schedule that is stored in memory.

Hold

•When in Programmable Cool or Programmable Heat, you can lock in the present settings indefinitely by pressing the Hold button once (PROG flashes). Press Hold button again to leave Hold mode (PROG solid). For a temporary Hold period, raise or lower set temperature to desired set temperature. The thermostat will automatically return to programmed set temperature after 2 hours.

13

Image 13

Contents Thermostats Installation InstructionsSpecifications Important safety informationIntroduction Overview Thermostat Control Installation Instructions Use supplied screws to mount thermostat base to wall Turn off power to the heating and cooling systemWiring diagrams Terminals for six wires 2 heat/1 cool system RAK148P1 only Configuration Mode Settings Configuration modeSetup screens for Configuration Mode are as follows Each screenAdjust to control the maximum Heat set temperature allowed Adjust to control the minimum Cool set temperature allowedOperation Setting the Room Temperature Setpoint TemperatureStarting the thermostat Testing the thermostatAir conditioning should come on within a few seconds Heat should come on within a few seconds Heat TestFan Test Off Operating functionsCool HeatSetting the time and day of the week Program Overview ProgrammingOff position Repeat Programming Heat temperature is displayed 60F to 85FPress the button and hold for Seconds. The days of the week Factory preprogramming Low battery warning, Off mode Low battery indicatorLow battery warning, Cool mode Low battery warning, Heat modeCombination failure, Cool mode Combination failure, Off modeCombination failure, Heat mode Problem Solution Troubleshooting tipsPage Page Page For The Period GE Will Replace Thermostat Warranty